Study of the Behaviour of Hybrid Nano Jute Fiber Composite under Impact Loads
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 2
Abstract
In this paper presented the behavior of nano jute fiber composite under impact loads by varying percentage of weight fractions of jute fiber, as interlayer of glass fiber epoxy composite. Impact strength of the composite is the requirement to know the ability of the material under impact loads. The ratio of glass fiber and epoxy resin is 1:1. Hand la up method is employed for fabricating the samples and trimmed them under ASTM D 256 standards for experimentation. It is observed that the impact strength and hardness of composite is increased after utilizing the nano jute fiber composite than pure glass fiber epoxy composite.
Authors and Affiliations
Keywords
Related Articles
- EP ID EP347386
- DOI 10.24247/ijmperdapr201863
- Views 70
- Downloads 0
Immobilized PAni-TiO2 Nano-Photocatalyst Modeling for Photocatalytic Degradation of 1, 2-Dichloroethane using Response Surface Methodology (RSM) and Artificial Neural Network (ANN)
Heterogeneous photocatalytic degradation as an advanced oxidation process (AOP) is a complicated process, because many independent influential parameters can affect degradation efficiency as the response of the system. T...
Study of Mechanical Properties of Open Cell AL6061 Alloy Foam
The mechanical behavior of 20 ppi open cells Al6061 alloy foam is studied under uniaxial tensile, compression and bending loads. In addition to the common stress–strain measurements, peak load, ultimate stress, displacem...
JOB SHOP SCHEDULING USING DIFFERENTIAL EVOLUTION ALGORITHM
This paper presents a differential evolution approach for job shop scheduling problems. The job shop scheduling problem, a class of combinatorial optimization problem that involves discrete optimization over discrete var...
Mechanical and Thermomechanical Properties of Carbon Fibre Reinforced Thermoplastic Composite Fabricated Using Fused Deposition Modelling (FDM) Method: a Review
Fused deposition modelling (FDM) is widely used method to fabricate thermoplastic parts, which are mainly used as rapid prototypes for functional testing with advantages of minimal wastage, and ease of material change. D...
ROOMBOTS—MODULAR ROBOTS FOR ADAPTIVE FURNITURE
Autonomous mobile robot navigation has generated a lot of interest among researchers in recent years. Herein, we outline the design of a four-tracked autonomous mobile robot with a main-controller regulated on the basis...