STUDY OF THE CONDITION OF THE SELECTED LANDSLIDES IN THE AREA OF KADZIELNIA
Journal Title: Structure and Environment - Year 2016, Vol 0, Issue 1
Abstract
The Kadzielnia nature reserve located in Kielce is a remnant of the long-term exploitation of limestone. The slopes of a former quarry are unstable; landslide processes occur there, posing a threat to humans and disturbing the landscape. This condition requires observation of the changes in order to take preventive measures. The article presents the preliminary results of such observations, performed for four selected landslides in Kadzielnia. While measuring, modern geodetic techniques were applied, including satellite technology, scanning tacheometry and laser scanning. Obtained results indicate slight displacements of the monitored walls over several months. Observations which were made are initiating study on the behavior of the landslides in the area of Kadzielnia, aimed at early detection of threats and enabling taking safety procedures.
Authors and Affiliations
Paweł Duma
Keywords
Related Articles
- EP ID EP195394
- DOI -
- Views 89
- Downloads 0
AN ACCURACY ASSESSMENT OF SPOT HEIGHTS ON DIGITAL ELEVATION MODEL (DEM) DERIVED FROM ALS SURVEY: CASE STUDY OF ŁYSICA MASSIF
The paper presents an analysis of ALS – derived DEM (created as part of ISOK project) of Łysica massif in Łysogóry range, Poland. The contour map, slope map, and cross sections of the massif were derived of DEM, and comp...
TIMBER NOISE BARRIERS
The paper presents the issue of protection against the negative effects of noise by means of timber noise barrier. Timber noise barriers are described with regard to the types of construction of the acoustic panel, techn...
PROCESSES MODELLING IN TWO-NAVE BUILDING WITH NATURAL AIR EXCHANGE
The paper explains ventilation air exchange driven by the gravitational force and wind, and the major factors affecting the phenomenon. A mathematical model, namely a system of equations, for computations of natural vent...
TECHNOLOGICAL ASPECT OF BRICK PRODUCTION USING THE METHOD OF AUTOCLAVING
Production of sand-lime bricks using the autoclaving method is a well-known process, especially in Europe. During the autoclaving process, also called the hydrothermal treatment or hardening the materials with lime and/o...
FATIGUE LIFE COMPARISON OF RECYCLED COLD MIXES WITH DIFERENT TYPE OF BITUMEN BINDER
loading cycles. The possibility of using foamed bitumen and bitumen emulsion as binders in the composition of road bases makes it necessary to identify the influence of the binder type on the service life of these layers...