Study of the influence of electric transmission parameters on the efficiency of freight rolling stock of direct current
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 1, Issue 3
Abstract
<p>The negative impact of non-uniformity of current distribution in the power circuit of a freight direct current rolling stock on its operation efficiency was experimentally established. In contrast to existing approaches, the presented study reveals the entire range of factors that together affect non-uniformity of current distribution. The method of calculation of comprehensive influence of structural, technological and operational factors on current distribution was developed. It made it possible to determine conditions of elimination of the difference of currents and to increase traction properties of locomotives when controlling freight trains. The proposed coefficients allow analyzing the effect of various factors on current distribution and relationship between parameters of motors, connected in parallel. They visually show that deviation of currents at interaction of a locomotive with freight wagons affect not only particular parameters of wheel-motor units, but also their connection. The merit of this approach is the possibility of evaluation of non-uniformity of current distribution depending on the structure of electric machines and connection of structural parameters of a wheel-motor unit. Results of the study can be used during repairs of freight direct current rolling stock and in designing automatic control systems.</p>
Authors and Affiliations
Oleksandr Gorobchenko, Oleksij Fomin, Volodimir Fomin, Vajcheslav Kovalenko
Keywords
Related Articles
- EP ID EP527745
- DOI 10.15587/1729-4061.2018.121713
- Views 68
- Downloads 0
Influence of grape seeds powder on preservation of fats in confectionary glaze
The polyphenol composition of grape seeds powder (GSP) and defatted grape seeds flour (DGSF) in wateralcohol (ethanol, isopropanol) extracts was studied by the chromatographic method. There was established the content o...
Development of electricarc pseudoalloy coatings for the strengthening of copper walls of molds
<p>On the basis of the requirements for protective coatings of molds, the materials of pseudoalloys were determined for applying coatings from two wires. One of the wires is copper, which provides maintaining a sufficien...
Computer simulation methods of redundant measurements with the nonlinear transformation function
<p>The studies of possibilities of methods of redundant measurements have found the high efficiency of the presented methods for increasing the accuracy of measurements. It is proved that the equation of redundant measur...
Construction of an algorithm for the selection of rigid stops in steel concrete beams
<p>Calculation of steel-concrete beams is performed with a rigid connection between concrete and a steel strip. This is possible if one installs hard stops that prevent the displacement of the strip with respect to concr...
Optimizing performance of lithiumion battery by nanosilicon addition mixed in LI4TI5O12 anode made using mechanochemicalhydrothermal method
<p>Lithium Titanate (Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> or LTO) is one of the best candidates to replace graphite as anode material in the lithium-ion battery (LIB), due to unwanted solid electrolyte interphase (...