Study of the influence of oxidizing parameters on the composition and morphology of Al2O3•CoOx coatings on AL25 alloy
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 2, Issue 12
Abstract
<p>The influence of operating parameters of plasma-electrolytic oxidation in diphosphate cobalt-containing electrolyte on the process of formation of oxide coatings on alumosilicon alloy AL25 (GOST 1583) was studied. It was shown that inclusion of cobalt into the composition of surface oxide layers leads to a change of morphology and topography of the surface. Variation of current density and PEO time allows flexible control of the process of incorporation of the catalytic component into the matrix of oxide of basic metal. It was shown that at an increase in oxidation time, cobalt content in the surface oxide layer increases.</p><p>The rational mode of plasma-electrolytic treatment of piston alloy in diphosphate electrolyte for obtaining oxide coatings, enriched with cobalt, was substantiated. It is advisable to perform formation of PEO-coatings on AL25 with developed globular-mosaic surface, maximum cobalt content, with minimizing impurities in the range of current densities of 3–5 A/dm<sup>2</sup> within 20–40 min. The obtained cobalt-containing oxide coatings can be used in the air and water purification systems, specifically, for intracylinder catalysis of gas emissions of internal combustion engines.</p>
Authors and Affiliations
Ann Karakurkchi, Mykola Sakhnenko, Maryna Ved'
Keywords
Related Articles
- EP ID EP527941
- DOI 10.15587/1729-4061.2018.128457
- Views 38
- Downloads 0
Development of the mathematical model and the method to solve a problem on the optimization of packing the ellipsoids into a convex container
<p>This paper addresses the problem on the optimal packing of the predefined set of ellipsoids into a convex container of minimum volume. The ellipsoids are assigned by the dimensions of semi-axes and arrangement paramet...
Investigation and analysis of the possibility of diffusionless phase transformations in the surface layer of a part under the action of grinding temperatures
<p>The possibility of diffusionless phase transformations in the surface layer of the ground part under the influence of instantaneous grinding temperature is investigated and analyzed. This is important because the phas...
Modelling the loading of the nose-free cutting edges of face mill with a spiral-stepped arrangement of inserts
<p>A mathematical model of loading of the nose-free cutting edges of each insert of the face mill with a spiral-stepped cutting scheme was created. It was established that the size of the cut elements depends on the feed...
A study of the effect of deposition conditions on the phase-structural state of ion-plasma WC – TiC coatings
<p>Studies of the influence of thermal and radiation factors on the elemental composition and phase-structural state of WC-TiC ion-plasma condensates of a quasibinary system are presented. As a thermal factor, we used di...
Development of an algorithm for complex processing of geospatial data in the special-purpose geoinformation system in conditions of diversity and uncertainty of data
The algorithm of complex processing of geospatial data in special-purpose geoinformation systems in the conditions of diversity and uncertainty of data is developed. The novelty of the algorithm is to ensure the function...