Study of The Microstructure of Aisi Steel 304l in wz, Haz And Bm After Welding in the Gmaw Process

Journal Title: IOSR Journal of Dental and Medical Sciences (IOSR-JDMS) - Year 2017, Vol 17, Issue 2

Abstract

In this work, itwas qualitative measuredthe microstructure of the HAZ(Heat Affected Zone)and WZ(Weld Zone) of AISI 304L Stainless Steel by the GMAW (Gas Metal Arc Welding) processpulsed,using the singlebead-on- plate procedure.For this purpose,was used GMAW process (Gas Metal Arc Welding) was in singlepass deposition on plate of this steel 304L. After the welding process it was observed that the transfer occurred (metal transfer)exercised important effect on some on some properties of the weld joint, such as directing of the grains, inter dendritic spacing and microhardnessVickersduring the welding. In the Centre of the weld bead,heat flow and dendritics structures andthe microstructure is predominantly ferrite and with austeniticas lines because the steel is predominantly austenitic.Growth in weld joints is, being an epitaxial phenomenon, where the grains of the WZ increase with the same crystalline orientation of the grains of the HAZ, as if the grains were planted in BM.

Authors and Affiliations

*Queiroz, A, V, Fernandes, M, T, Silva, L,M, Demarque, R, Oliveira, E.M, Ellem, P. S, Lima, I,R, Barbosa, G, C. , Teixeira, P, S. , Castro, J.A. 10

Keywords

Related Articles

Middle Mesial Canals in Mandibular Permanent Molars – A Case Series And Report

Eradication of microbes from root canals and impeding of further reinfection is the basic support of endodontic treatment. This is achieved by overall disinfection and shaping of canals which can then be filled using a t...

A Cross-Sectional Epidemiological Study to Evaluate the Awareness of Patients And Private Dental Practitioners Regarding Dental Implant Therapy in Nashik.

In the present era, dental implant is most recent and promising treatment modality for tooth replacement. However it’s awareness is disputable. Hence, the aim of the study was to evaluate the knowledge of patients and pr...

Comparative Study of Intravaginal Misoprostol (Pge1) And Intracervical Dinoprostone (Pge2) for Induction of Labour in Premature Rupture of Membranes (Prom) At Term.

Comparative study of intravaginal misoprostol and intracervical Dinoprostone for induction of labour in Premature rupture of membranes at term. This is a prospective observational study done during Feb 2015 to Jan 2016....

Mineral Trioxide Aggregate as periapicalobturation: A case report and review of literature.

Disease of maxillary anterior teeth resulting from any injury is a relatively common event. These teeth should be properly managed to improve long term success rate and better prognosis. Recently in many literature Miner...

Stone Expulsion Rate of Small Distal Ureteric Calculus Could Be Predicted With Serum C-Reactive Protein, White Cell Counts And Neutrophil Percentage: A Prospective Study

Purpose:To determine the relationship between stone expulsion rate of distal ureteric calculus less than or equal to 10mm in size and C reactive protein (CRP) level, white cell count and neutrophil percentage. Materials...

Download PDF file
  • EP ID EP365570
  • DOI -
  • Views 57
  • Downloads 0

How To Cite

*Queiroz, A, V, Fernandes, M, T, Silva, L, M, Demarque, R, Oliveira, E. M, Ellem, P. S, Lima, I, R, Barbosa, G, C. , Teixeira, P, S. , Castro, J. A. 10 (2017). Study of The Microstructure of Aisi Steel 304l in wz, Haz And Bm After Welding in the Gmaw Process. IOSR Journal of Dental and Medical Sciences (IOSR-JDMS), 17(2), 14-19. https://europub.co.uk/articles/-A-365570