STUDY ON HEAT TRANSFER EFFICIENCY PARAMETRES IMPROVEMENT IN SYSTEMS or UNITS
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 7
Abstract
Heat exchangers are an important component in many industrial systems especially in process industries. So many commercial types of heat exchangers are available in market for exchange of heat as well as for recovery of waste heat. Improved heat transfer efficiency leads to decrease in energy consumption which then results in lower equipment operational and maintenance cost, lower emissions, and consequently also lower environmental impact. However, common enhancement approaches such as adding fins or tube inserts may not always be suitable or feasible – especially in case of heat recovery from streams having a high fouling propensity. Since heat transfer rate depends also on flow field characteristics, fluid distribution, and fouling which can all be greatly influenced by the actual shapes of flow system components, several simplified models for fast and accurate enough prediction of fluid distribution as well as applications for shape optimization based on these models were developed. The created applications can then be employed during the design of heat exchange units to improve their performance and reliability.
Authors and Affiliations
Pankaj Kumar *
Keywords
Related Articles
- EP ID EP123210
- DOI 10.5281/zenodo.57044
- Views 70
- Downloads 0
ARCHITECTURE OF NEW HIDING TECHNIQUE FOR PROJECTED & COMPRESSED TEXT IN DIGITAL IMAGE
The art of information hiding has received lots of attention in the recent years as security of information has become a big concern in this internet epoch. As sharing of sensitive information through a common com...
Experimental Techniques to find Thermal Residual Stress in Composite Materials –A study of the Literature Review
If two dissimilar materials are joined at high temperature, a very high residual stresses developed near the interface of materials. The mismatch between the co-efficient of thermal expansion leads to stress conce...
Land use/Land cover Mapping of IGNP Command Area in Bikaner District
The pressures on the natural resources have tremendously increased over years by man’s greed for commercialization and livelihood of local people. Devoid of regeneration, population and wide scale tree felling depleted...
Performance comparison between CNFET & Conventional CMOS based Arithmetic Logic Unit
This paper presents the implementation and analysis of Carbon Nano tube Field Effect transistor (CNFET) and CMOS based one bit ALU .It is well known that the ALU is the key component of any processor. The functio...
Optimization of Solvent Extraction of Oil From Wild Bush Mango Seed (Irvingia
Four operating parameters of the solvent extraction of oil from seed of wild bush mango plant (irvingia gabonensis) using normal hexane as the solvent have been optimized by a composite design. A linear model was...