Study on modernization processes in the coating metal surfaces (plain bearings) by thermal spraying
Journal Title: INCAS BULLETIN - Year 2011, Vol 3, Issue 3
Abstract
Knowledge accumulated within the metal coating through thermal spraying allows the understanding of aspects related to the coat structure phenomena, in this case of the routs that need to be followed in order to create strong and stabile connections between the coats subsided through thermal spraying, between the particles that compose those coats, respectively. However, all this knowledge does not ensure the understanding of some practical situations that are apparently paradoxes, as for instance the absence of tin bronze adherence to ignobly steel holders, the perfect adherence of bronze to the aluminum on the same types of holders, in the context in which both elements, tin and aluminum, respectively are found in equal quantity in the two type of bonze that maintain them in solid solutions (below 10%). The parallel study in the sinter antifriction domain has offered information regarding the optimal correlation between the composition of antifriction material and the required type of application, the optimal pinches level and the way that this morphological characteristic may be influenced. By experimental research it is necessary to determine the conditions under which such coverage can be obtained by thermal spraying of the metal coatings.
Authors and Affiliations
Elena IRIMIE
Keywords
Related Articles
- EP ID EP129653
- DOI 10.13111/2066-8201.2011.3.3.9
- Views 95
- Downloads 0
Free Flight vs. Centralized Air Traffic Management
The current Air Traffic Management system is subject to structural changes, which are expected over the next 20 years. These changes are required for a number of reasons: The current system inflicts delays and fuel ine...
A Coordinate Transformation for Unsteady Boundary Layer Equations
This paper presents a new coordinate transformation for unsteady, incompressible boundary layer equations that applies to both laminar and turbulent flows. A generalization of this coordinate transformation is also propo...
Professor Ion Stroescu’s role to the construction of aerodynamic wind tunnels
Horizontal Flight Dynamics Simulations using a Simplified Airplane Model and Considering Wind Perturbation
An in-house method of Newton-Euler inverse dynamics guidance based on a simplified airplane model in horizontal flight was proposed in a previous paper presented at NMAS 2018 workshop [1]. The goal was to guide the airpl...
Comparative Analysis Program for Experimental and Calculated Data
This article aims to provide an interactive in-house tool to quickly asses the stress in the critical points of the aeronautical structures. The software compares the results between the stress values obtained from the e...