STUDY ON PC CONTINUOUS GIRDER MECHANICAL PROPERTIES BASED ON TENDON TENSIONING PATTERN
Journal Title: Acta Mechanica Malaysia (AMM) - Year 2018, Vol 1, Issue 1
Abstract
prestressed concrete continuous box girder in China. With the change of condition in the construction site, the construction sequence of the bridge will be changed inevitable, so to adjust the tendon tension mode accordingly, which will cause the alteration of structural mechanics performance. The finite element analysis model of a continuous girder will be built to compare the difference with two tendon tension cases according to relevant pouring sequence. The related conclusions are obtained, so can help to provide beneficial reference for the similar engineering.
Authors and Affiliations
Luo Xu
POTENTIAL OF MUNICIPAL SOLID WASTE IN LIBYA FOR ENERGY UTILIZATION
Municipal Solid Waste (MSW) management is a chronic environmental problem in most of the developing countries, including the Libya. The concept of Waste-to Energy (WTE) is known as one of the several technologies capable...
STUDY ON SEDIMENTATION STABILITY OF MAHUA AND SIMAROUBA OIL BASED MAGNETORHEOLOGICAL FLUIDS
Magnetorheological fluids (MRFs) are peculiar of smart fluids whose rheological properties can be efficiently controlled by varying applied magnetic field. Owing to this peculiar property, it can be utilized in industria...
ANALYSIS AND OPTIMIZATION OF CONNECTING TIE ROD ASSEMBLY IN AGRICULTURE APPLICATION
The tie rod ensures the safety of vehicle on both impact and vibration perspective also plays one of the major roles in connecting primary parts of automobile and steering mechanism. Its end is an indication system of ve...
AN EFFICIENT PSEUDO-POTENTIAL MULTIPHASE LATTICE BOLTZMANN SIMULATION MODEL FOR THREE-DIMENSIONAL MULTIPHASE FLOWS
In this paper, a single-component pseudo-potential model is analyzed by modifying corresponding equation of state. Simulation results show that with the modified vdW equation, this model is capable to simulate the multip...
MODELING AND KINEMATICS SIMULATION OF PLANE TEN-BAR MECHANISM OF WARP KNITTING MACHINE BASED ON SIMCAPE/MULTIBODY
A kinematics simulation model was established for the driven-latch needle of warp knitting machine, and the simulation was implemented by using SimMultibody. Thus, the simulation curves of displacement, velocity and acce...