STUDY ON POTENTIAL UTILIZATION OF SUGARCANE BAGASSE ASH IN STEEL FIBER REINFORCED CONCRETE
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 4
Abstract
Aim of the project is to utilize the waste product produced by agricultural industry and enhancement of concrete strength by using steel fiber. Sugarcane bagasse ash (SCBA) is a left-over industrial byproduct which is used as a replacement of cement. SCBA has high content in silica. Using of SCBA in concrete is a remarkable possibility for economy and conservation of natural resources. One of the important properties of steel fiber reinforced concrete (SFRC) is its superior resistance to cracking and crack propagation. As a result of this ability to arrest cracks, fibers are able to hold the matrix together even after extensive cracking. In this project SCBA has been partially replaced with cement in the ratio of 0%, 5%, 10%, 15% and 20% by the weight of cement in M30 Grade concrete. From the test results optimum percentage of SCBA has achieved on steel fiber reinforced concrete.
Authors and Affiliations
M. Inbasekar*,
Comparative Study of Surface Morphology and Spectroscopic Analysis for Corona and Chromic Acid Treated Polyethylene Film for Water Based Ink Printing
Polyethylene, Specially the LDPE is one of the most widely used thermoplastic in packaging industries, due to its low cost, broad range of properties like excellent moisture barrier and chemical resistance which a...
Use of Trypan blue-Arabinose System in Photogalvanic Cell for Solar Energy Conversion and Storage
Photogalvanic effect was studied in the cell containing Trypan blue as photosensitizer in Arabinose-NaOH system. The conversion efficiency of the cell, fill factor and the cell performance were observed 0.80%, 0.23 and...
EFFICIENT LIFTING-BASED FORWARD AND INVERSE DWT BASED ON VLSI ARCHITECTURE
The wavelet transform is denoted by ‘WT’ gained wide-ranging approval in processing signal and in compressing image. A 2D analysis must be implemented to use WT for processing the image. Such powerful signal analy...
Pseudorandom Information
Expert systems [7] must work. In fact, few se the unfortunate principles of programming languages. Taxi, solution to all of these obstacles.
Design of Digital Finite Impulse Response Filter Using Different Low Power Mulitipliers
Low Multipliers and Adders are used to reduce dynamic power consumption of a Digital Finite Impulse Response (FIR) filter. These methods include low power serial multiplier and serial adder, combinational booth mu...