Study On Some Copper - Molybdenum Based Composite Materials Condensed from the Vapour Phase
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2007, Vol 30, Issue 2
Abstract
Design features of equipment are given for realizing high-speed process of electron beam evaporation and condensation. Peculiarities of phase composition and structure of a crystallized pool (melt) on copper base are studied. Assumption was made about interrelation of structure-phase state of the melt and rate of evaporation-condensation. Specifics of surface structure and volume of condensate in different sections (before and after etching) are investigated. Technological defects, their influence on strength and ductility of the condensate at tensile test are considered. Interrelation of temperature dependence of energy of deformation activation, specifics of condensate fracture and technological defects of structure, different by origin, are studied.
Authors and Affiliations
N. GRECHANYUK, Gheorghe CROITORU
Keywords
Related Articles
- EP ID EP660925
- DOI -
- Views 52
- Downloads 0
Solutocapillary Effects of Sulphur in CaO-Al2O3 Slags, in Marangoni Instability and Convection Onset, Related to the Desulphurization of low Carbon, Aluminium Killed Steels
Based on the “one layer model” applied to desulphurization slag layer with boundary conditions, imposed due to the sulphur transfer through the interface steel-slag during desulphurization process, the threshold conditio...
Studies and Research on the Production of TiO2 and TiN Thin Films by Assisted Physical Vapor Deposition Magnetron Process
The experimental research carried out in this paper aims at obtaining thin films of TiO2 and TiN and at characterizing them in terms of morphology, structure, transparency and electrical properties. The films were obtain...
Calculation of the Deposited Layer Thickness Through Side Injection of Powder Using CO2 Laser
The paper presents a simplified theoretical model for estimating the operating parameters of the laser deposition by injecting the powder into the metal bath. The study considered the influence of the powder particles on...
Silica thin Films Obtaining by Sol – Gel Dip Coating with Controlled Optical Properties
Transparent oxide films are widely employed as antireflection or high reflection coatings, band-pass filters and narrow-band-filters in various optical and electronic devices. The performances of these devices are based...
Studies About Electrochemical Plating with Zinc-Nickel Alloys
The electrochemical deposition of zinc and combinations with elements of the 8th group of the Periodic System (nickel, cobalt, iron) have good properties for anticorrosive protection, compare with pure zinc. For steel pi...