STUDY ON WATER QUALITY INDICATORS AT TAIA TREATMENT PLANT HUNDEDOARA COUNTY
Journal Title: Fiability & Durability - Year 2017, Vol 19, Issue 1
Abstract
Water is consumed in its natural form or in a processed one. It is a well-known fact that enterprises, institutions, energy and agriculture consume it as processed water whereas the population consumes it as drinking water or wastewater. This paper presents the study of water quality indicators from the treatment plant Taia in Hunedoara County. The following quality indicators were determined: turbidity, hardness, alkalinity, chlorine oxide and organic substances. The determined quality indicators revealed that they fall within the limits set by legislation, with some exceptions. In each step of purification of organic substances there has been a continual reduction, this being carried out both biologically because of the biomass deposited on sand grains in the filter bed as well as especially during the oxidation step with active chlorine.
Authors and Affiliations
CAZALBAŞU Ramona Violeta, CĂPĂŢÎNĂ Camelia, Cîrţînă DANIELA
Keywords
Related Articles
- EP ID EP232173
- DOI -
- Views 79
- Downloads 0
THE INFLUENCE OF THE CONSTRUCTIVE PARAMETERS ON THE VIBRATION INHERENT FREQUENCIES AT BENDING FROM TWOSHAFTS TRANSMISSION
The shafts transmissions that can be treated as the elastic linkage systems of various sections, length and specific weights, suspended on elastic supports. The average fiber elastic deforms under the action of own weigh...
ABOUT FEATURES OF SIMULATION MODULE IN SOLIDWORKS
In this paper are presented the additional features and analysis steps of Simulation module in SolidWorks, for conducting a more detailed study of designed parts. There are presented the module features, the settings tha...
GLASS FIBERS – MODERN METHOD IN THE WOOD BEAMS REINFORCEMENT
One of the defining goals of this paper is getting new resistant material which combine the qualities of basic materials that get into its composition but not to borrow from them their negative properties. Specifically,...
ASPECTS CONCERNING THE IMPLEMENTATION OF A METHODOLOGY FOR DETERMINING THE COLUMNS DIAMETERS OF GUIDING A PRESE - (Part II)
In this paper we present a methodology for determining the value of the diameters of the guide column of a press which has a construction with closed frame. For determining these values is necessary to go through several...
PROCESSING OPERATIONS OF METALLIC CARBIDES THROUGH COMPLEX EROSION
With the diversification of the types of materials, due to the requirements of high strength and hardness and, at the same time, with the necessity of increasing their processing speed, it was necessary to conceive and r...