Study Regarding the Good Cavitation Erosion Resistance of a 13Cr-4Ni Stainless Steel used to Manufacture the Components Exposed to Water of the Hydraulic Turbines
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2017, Vol 24, Issue 1
Abstract
This paper presents some information regarding the hydraulic turbines respectively the experimental results on cavitation erosion behavior of a 13Cr-4Ni stainless steel used to manufacture the components exposed to water of the Francis, Kaplan and Pelton hydraulic turbines. So, the presented experimental results of this paper highlight the good cavitation erosion resistance of the analyzed 13Cr-4Ni stainless steel.
Authors and Affiliations
Marian-Dumitru Nedeloni, Eugen Birtărescu, Lidia Nedeloni, Aurel Băra, Adrian Pellac
Keywords
Related Articles
- EP ID EP445129
- DOI -
- Views 83
- Downloads 0
Coil Springs Layer Used to Support a Car Vertical Dynamics Simulator and to Reduce the Maximum Actuation Force
A Danaher Thomson linear actuator with ball screw drive and a real-time control system are used here to induce vertical displacements under the driver/user seat of an in-house dynamic car simulator. In order to better su...
Simulation of a Pneumatically Driven Robotic Gripper Used for Handling Cylindrical Workpieces
The paper presents the geometrical model of a robotic gripper with 3 fingers, accomplished by using SolidWorks software, used for grasping cylindrical workpieces of the same length, but with different diameters. Applying...
Modal-Based Design Improvement of a Butterfly Valve Disc
The dynamic behavior control of a butterfly valve is important because, when one of the valve disc natural frequency is close to the frequency of vortex shedding, which appears when the valve is fully open or partially...
Influence at Work Distance between the Sonotrode and Specimen to Cavitational Erosion
The paper presents the results of cavitation erosion tests performed on five samples from pure aluminum using the vibratory method with stationary specimen. The main purpose of this research is for deter-mine which is...
Tests Performed on Hydraulic Turbines at Commissioning or after Capital Repairs. Part II. Tests Per-formed on a 6.5 MW Kaplan Turbine
The paper presents the tests performed on a hydraulic turbine on commissioning, the devices, test methods and the results obtained from the respective tests, as well as the conclusions and recommendations resulted from t...