Study the Comparison of Wear Characterization Al6061/ Red Soil and Al6061/ Granite Dust Based Metal Matrix Composite Material
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 2
Abstract
Aluminium based metal grid composites (MMCs) are well known materials for basic applications in the air ship and vehicle ventures, exceedingly wear and erosion resistance, conductive, lightweight and have a high quality. Wear and aluminium of Al6061 with red soil and stone tidy fortification through blend throwing strategy was performed. Wear test was made by utilizing Pin on Disk Apparatus on the readied test. It was found that, under mellow wear conditions, the composite showed bring down wear rate and rubbing coefficient, contrasted with rock tidy. Nonetheless, for serious wear conditions, the composite showed higher wear rate and erosion coefficient, and it was elucidated that the contact and wear conduct of Al6061/red soil and Al6061/rock clean composite is to a great extent affected by the connected heap of 4kg, and there exists a basic load past, which is stone tidy that could negatively affect the wear resistance of red soil..
The Effects of Nano Additives on Performance and Emission Characteristics of A VCR Diesel Engine Fuelled with Diesel-Water Emulsion
The present study investigates the performance and emission characteristics of single cylinder VCR diesel engine fuelled with nano additive blended diesel emulsion and the results are compared with neat diesel. The nano...
State of the Art of Structural Health Monitoring of Wind TurbineS
In the search for a sustainable and clean alternative to fossil fuel, renewable energy sources, specifically, wind energy is seen to possess immense potential with a lot of scope for improvement. Wind energy systems, usi...
ANALYSIS OF INCREMENTAL SHEET FORMING PROCESS THROUGH SIMULATION
Incremental sheet forming (ISF) process is a flexible manufacturing process to produce complex 3D products at reasonable manufacturing cost. An advantage of ISF is the improved formability than traditional sheet forming...
A COMPREHENSIVE STUDY ON THE SURFACE CHARACTERISTICS OF MICRO ULTRASONIC MACHINED CERAMIC-GLASS MATERIAL
Objectives The main Objetive of this paper is to find the surface characteristics of Ceramic glass machined by ultrasonic machining words. Methods/Statistical Analysis Ultrasonic machining (USM) procedure has for quite...
Design of Compliant Mechanisms for New Age Industry Devices –A Topology Optimisation Approach
Compliant Mechanism also transfers or transforms motion, force or energy. Unlike rigid-link mechanisms, however, compliant mechanisms gain at least some of their mobility from the deflection of flexible members rather th...