Study the Performance of Silicon-On-Insulator Based Junction Less Transistor Using MOS and FGMOS 6t-Sram Cells
Journal Title: Engineering and Technology Journal - Year 2025, Vol 10, Issue 07
Abstract
In this research, a 6T SRAM cell comprises of two cross-coupled inverters and two access transistors was design and simulated using Sentaurus TCAD and Spice Simulator. The cross-coupled inverters are the memory part used to store the data. When the access transistors are turn ON, enabling the read/write operation. 6T SRAM using metal oxide semiconductor (MOS) and floating gate metal oxide semiconductor (FGMOS) of different node technologies at constant drain voltage (Vdd) of 0.35V were designed and simulated. Power dissipation and delay were computed for different technology nodes using MOS and FGMOS devices. It has been observed that 45nm technology node 6T SRAM cell demonstrated most optimized power dissipation as compared to 180nm, 90nm, and 65nm technology 6T-SRAM cells when we use MOS and FGMOS. In case of delay measurement, it was observed that device with FGMOS have most improved. This reduces the power dissipation, making the SRAM cell applicable for low power applications, and the use of FGMOS further decreases the power dissipation and delay of the 6T-SRAM cell.
Authors and Affiliations
Bubakari Joda , Mohammed A. Sule , Bashir I. Njodi , Abbas Adamu , Denis D. Jonathan,
Keywords
Related Articles
- EP ID EP770200
- DOI 10.47191/etj/v10i07.17
- Views 5
- Downloads 0
MORPHOLOGICAL, CHEMICAL, AND THERMAL CHARACTERIZATION OF TOBACCO STALK FOR APPLICATION IN COMPOSITE MATERIALS
The main objective of this study is to analyze the use of tobacco stalk to develop new composite materials. For this purpose, tests and analyses were carried out to characterize the morphological, thermal, and chemical p...
A Short-Term Prediction Model for the Number of Registered Motor Vehicles Using Facebook Prophet Forecasting Approach
Accurate prediction of the total annual number of motor vehicles to be registered in a country is very important to the government because it will help Driver and Vehicle Licensing Authority (DVLA) policymakers to put go...
The Implementation Analysis of the Electronic Road Pricing (ERP) System on Fatmawati Road (Ketimun 1 Intersection – TB Simatupang Intersection)
Traffic congestion on Fatmawati Road has resulted in longer travel times, increased air pollution, and economic losses. To address this issue, this study evaluates the implementation of the Electronic Road Pricing (ERP)...
QINGHAI PROVINCE WATER-SAVING AGRICULTURE ZONING STUDY
The factors affecting the development of agriculture in Qinghai Province are geographical location, climate as well as inefficient agricultural water use and wasted water resources. In this paper, four level 1 indicators...
Using Biodegradable Materials in Crab Pots to Mitigate Ghost Fishing Effects
The modification of crab traps using biodegradable cotton rope, particularly on panel ropes and trap mouth ropes, aims to reduce the impact of ghost fishing. While the characteristics of cotton rope have been tested in t...