Studying fiberreinforced concrete for casting housing parts of pumps
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 6, Issue 12
Abstract
<p>Many enterprises of the mining and metallurgical industry use pumps transferring aggressive liquids and slurries containing abrasive particles. For the manufacture of pump housings, taking into account their operating conditions, expensive alloy steels with increased wall thickness are used.</p><p>As a result of the study, the analysis of possible materials for the manufacture of fiber-reinforced concrete with the required strength characteristics was carried out. The selection of the optimum ratio of the components, providing, on the one hand, cost minimization of fiber-reinforced concrete and, on the other hand, rational technology for the manufacture of housing parts of fiber-reinforced concrete without additional machining, was carried out.</p><p>It was found that the specified conditions are met to the greatest extent by the mixes containing crushed rubble, quartz sand and ground quartz as aggregate, anchor steel fiber, as well as resin and hardener.</p><p>Theoretical and experimental studies showed that the aggregate must meet the following requirements: it must be three-component by particle size distribution, and the particle size of each component must differ by an order of magnitude from the previous one. This allows obtaining dense mixes by filling voids in large fractions with smaller particles.</p><p>As a result of laboratory studies, it was found that the compressive strength of such hardened mixes is 230...240 MPa.</p><p>It was found experimentally that the optimum fiber additive (steel anchor) should be within 3...5 % by weight.</p>The results of the study allow carrying out calculations of the parameters of pump housing parts with reduced wall thickness, lower weight, and also developing a technology for casting such parts with a high degree of readiness for use
Authors and Affiliations
Leonid Krupnik, Kassym Yelemessov, Saiyn Bortebayev, Dinara Baskanbayeva
Keywords
Related Articles
- EP ID EP528350
- DOI 10.15587/1729-4061.2018.151038
- Views 54
- Downloads 0
Methods for multicriterial selection of optimal routes in communication networks
<p>Traditionally, the problems of routing in communication networks are solved based on the scalar approach, which takes into consideration only one quality indicator. However, information transmission in communication n...
Development of signal converter of thermal sensors based on combination of thermal and capacity research methods
<p class="a"><span lang="EN-US">The problem of functional integration of thermal and capacity research methods, which provides the possibility of realizing a new generation of analog frontend of the Internet of Things i...
Experimental study of temperature mode of a fire in a cable tunnel
<p>We established, based on the conducted research into a change in temperature in the cable tunnel during fire, that in the combustion zone the temperature grows faster in comparison with the standard temperature mode o...
Enhancement of productivity of random sequences generation for information protection systems
<p class="a"><span lang="EN-US">The ways of enhancement of productivity of generation of random sequences, derived from physical sources for information protection systems were substantiated. This is necessary because to...
Evaluation of dynamic properties of gas pumping units according to the results of experimental researches
Experimental studies of the dynamic properties of gas pumping units (GPU) of various types, which allowed us to obtain GPU acceleration curves and determine the parameters of the transfer function through various transmi...