Studying the influence of the intensity of mechanochemical activation on the process of steam conversion of coal
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 4, Issue 6
Abstract
<p><em>We continue to study the process of converting coal into synthesis-gas under conditions of </em><em>aerosol nanocatalysis and reasonably expect would-be benefits of industrial technology. The advantages include a possibility to change the rate of reaction by influencing the intensity of mechanochemical activation of the catalyst. We investigated the process in a reactor where the mechanochemical activation is performed by the rotation of the catalytic system. The effect of activation intensity on chemical reactions under conditions of aerosol nanocatalysis has been proven earlier for the fluidized and vibro-liquefied layer of the catalytic system. Previous studies have shown that the mechanochemical activation affects the composition of conversion products, namely the ratio of СО:Н<sub>2</sub>. That would make it possible in the future to quickly reorient the production of synthesis-gas in line with the needs of market for organic products. The research results showed that at a temperature of 750 °C, 1 bar, MCA intensity of 2‒4 Hz and with an excess of coal (С:Н<sub>2</sub>О=5.5:1), the obtained ratio СО:Н<sub>2</sub>=1:1.99–1:.2,10 can be used for obtaining alcohols. At a temperature of 750 °C, 1 bar, MCA intensity of 0‒1 Hz and with an excess of coal (С:Н<sub>2</sub>О=5.5:1), the obtained ratio СО:Н<sub>2</sub>=1:1.19–1:1.35 can be applied for obtaining esters. We also noted the possibility of obtaining synthesis-gas with a ratio of 1:2.3 (2.5), which can be applied for obtaining hydrocarbons. This ratio was derived in the following mode: temperature 750 °C, pressure 1 bar, the ratio coal:water=1:0.87, MCA intensity 3‒4 Hz. The specified process to obtain hydrocarbons was investigated at 230 °C, 1 bar, in a vibro-liquefied layer of the catalyst aerosol at ratio СО:Н<sub>2</sub>=1:3 at 3 Hz and СО:Н<sub>2</sub>=1:2 at 3 and 5 Hz. The results of this paper are continuation of a global study into coal processing with obtaining the required industrial product. This special feature is the advantage of conducting a given process based on the aerosol nanocatalysis technology</em></p>
Authors and Affiliations
Artur Luhovskoi, Marat Glikin, Sergey Kudryavtsev, Irene Glikina
Keywords
Related Articles
- EP ID EP528090
- DOI 10.15587/1729-4061.2018.136371
- Views 46
- Downloads 0
Researching the interaction of different printed materials types with liquids
<p>The interaction of papers and films with the testing liquid was researched. Measurements of the contact angle were taken depending on the substrate and its morphology. Linear dimensions of the paper were determined wh...
Analysis of the piston engine operation on ethanol with the synthesis-gas additives
<p><em>We have conducted experimental study into parameters of the piston engine 1Ch 6.8/5.4 with forced ignition operated on ethanol with different additives of the synthesis-gas in the amount to 10 %. </em></p><p><em>W...
Determination of parameters of the stochastic inventory management system in the conditions of economically-based shortage
<p>A methodical approach to determining the optimal parameters of a stochastic inventory management system in the context of an economically justified deficit that allows responding quickly to fluctuations in demand and...
The study of influence of natural antioxidants on quality of peanut and linseed oil blends during their storage
<p>Influence of various natural antioxidants (oil extracts of sage and black currant leaves, garlic and hips) on in-storage quality of oils has been studied. Dynamics of the acid and peroxide numbers of fat of the develo...
Determining features of application of functional electrochemical coatings in technologies of surface treatment
<p>Approaches to the use of electrochemical coatings in surface treatment technologies are analyzed. It is shown that directed surface modification allows expanding the functional properties of the treated material, in p...