Subsonic Jet Pump Comparative Analysis
Journal Title: INCAS BULLETIN - Year 2018, Vol 10, Issue 1
Abstract
The paper presents the numerical and experimental studies carried out to optimize, from an aerodynamic point of view, a subsonic jet pump used on aircraft. The optimization of the subsonic jet pump will be done from the aerodynamic, aiming to re-design it such as to reduce as much as possible the emitted noise levels. For this, in a first stage, a parametric set of Reynolds Averaged Navier - Stokes numerical simulation was used on several possible designs, starting from an existing baseline, and including it. The goal was to identify the trends in the flow behavior when key baseline design parameters were varied. During the second stage, aerodynamic measurements were carried out on the two selected configurations and on the baseline configuration for the determination of the instantaneous flow velocity field. The measurements were carried out using cutting edge experimental measure techniques, namely Particle Image Velocimetry. The paper presents a comparison of the numerical and the experimental results and the conclusions of the analysis of the results.
Authors and Affiliations
George Bogdan GHERMAN, Florin FLOREAN, Ionut PORUMBEL
Keywords
Related Articles
- EP ID EP294909
- DOI 10.13111/2066-8201.2018.10.1.8
- Views 117
- Downloads 0
A two-dimensional linear elasticity problem for anisotropic materials, solved with a parallelization code
The present paper introduces a numerical approach of static linear elasticity equations for anisotropic materials. The domain and boundary conditions are simple, to enhance an easy implementation of the finite difference...
Continuous defects: dislocations and disclinations in finite elasto-plasticity with initial dislocations heterogeneities
Within the constitutive framework of second order plasticity, following [4,5], under the assumptions that the plastic distortion is not compatible, and the plastic connection is not compatible with the plastic distortion...
Methods of flow visualization
Flow visualization is an important topic in scientific visualization and has been the subject of active research for many years. Typically, data originates from numerical simulations, such as those of computational fluid...
Numerical Study of Transonic Axial Flow Rotating Cascade Aerodynamics – Part 1: 2D Case
The purpose of this paper is to present a 2D study regarding the numerical simulation of flow within a transonic highly-loaded rotating cascade from an axial compressor. In order to describe an intricate flow pattern of...
Aerodynamic Interference between Oscillating Lifting Surfaces and Fuselage Part 5: A Panel Method for Non-Lifting Bodies
In the fifth article of our series we will deal with the calculation of the unsteady aerodynamic forces on non-lifting bodies. We present here a contribution to the problem of the flow about non-lifting bodies. It is a p...