SUBSYNCHRONOUS RESONANCE MITIGATION USING WIDE AREA MEASUREMENT SYSTEM
Journal Title: International Journal of Electrical Engineering & Technology (IJEET) - Year 2019, Vol 10, Issue 1
Abstract
This paper presents the wide area measurement based controller for subsynchronous resonance mitigation in two machine system. The dq0 model of the two machine system.is considered in this paper. Generator 1 is multimass model as per given in IEEE first bench mark model and genereator 2 is considered as lumped model. The computation of frequency from voltage phasor of each generator is used for SSR mitigation. The difference of frequency of two machine is used as control signal . This control signal modulate the firing angle of thyristor controlled reactor through controller .As the control signal is global signal ,it will give damping to almost all torsional modes of oscillation and eliminates local controller for each torsional modes. This paper shows application of wide area controller in dq0 model mitigates subsynchronus oscillation in system..
Authors and Affiliations
M. G. SIDDH
Keywords
Related Articles
- EP ID EP46576
- DOI 10.34218/IJEET.10.1.2019.006
- Views 233
- Downloads 0
STREET LIGHT GLOWS ON DETECTING THE VEHICLE MOVEMENT USING ARDUINO UNO
This paper proposes how street light can be controlled in the presence or absence of vehicle to reduce the wastage of energy. The proposed work is accomplished by using Arduino UNO and sensors that will control the ele...
DESIGN OF GRID TIED BI-DIRECTIONAL INVERTER FOR BATTERY ENERGY STORAGE SYSTEM
The main aim is to develop the Energy Management Control (EMC) with proposed Bi-directional converter. The EMC consists of a towering EMC level and a small EMC level. Bi-directional Inverter is skilled of connecting a...
COMPARATIVE STUDY OF DOUBLY FED INDUCTION GENERATOR AND PERMANENT MAGNET SYNCHRONOUS GENERATOR IN WIND ENERGY CONVERSION SYSTEM
The objective of this research paper is to compare various types of generator used in Wind Energy Conversion system topologies. Now a days there is fast growth of variable speed WECS due to rapid advances in power elec...
MODELING, ANALYSIS AND ANFIS CONTROL FOR DTC-SVM OF INDUCTION MOTOR OF AN ELECTRIC VEHICLE USING ELECTRICAL DIFFERENTIAL
This paper presents modeling, analysis and simulation of DTC-SVM of Induction motor which suits for application of electric vehicle (EV) with two independent rear wheel drive. DTC-SVM endure from torque ripples and poo...
A STATIC NON-LINEAR CONTROLLED BRIDGE TYPE FAULT CURRENT LIMITER FOR TRANSIENT STABILITY AUGMENTATION OF MULTI-MACHINE POWER SYSTEM
This paper implements Fault Current Limiting (FCL) requirements and proposed a calculation method to determine the required dc reactor value, for the purpose of the converter continuous operation during dc faults. On t...