Surface Discharges and Flashover Voltages in Nanocomposite XLPE Samples
Journal Title: Engineering, Technology & Applied Science Research - Year 2018, Vol 8, Issue 6
Abstract
DC cable insulation is a field of intensive research activity. Special attention is being given to polymer nanocomposites, as promising insulation for such cables. Relatively little is known regarding surface discharges and flashover voltages for the aforementioned materials. In this paper, a comparison is made between samples of cross-linked polyethylene insulation with added MgO nanofillers and samples of pure polyethylene w.r.t. the behavior of surface discharges and flashover voltages in arrangements of water droplets of various conductivities on the said polymeric surfaces under the influence of uniform electric fields. Experimental evidence indicates that the flashover voltages of XLPE with MgO nanofillers are higher that the ones obtained with pure PE.
Authors and Affiliations
C. Papadakis, Y. Yin, M. Danikas, C. Charalambous
Modeling of Fatigue Crack Propagation in Aluminum Alloys Using an Energy Based Approach
Materials fatigue is a particularly serious and unsafe kind of material destruction. Investigations of the fatigue crack growth rate and fatigue life constitute very important and complex problems in mechanics. The under...
Frequency Speed Control of Rotary Travelling Wave Ultrasonic Motor Using Fuzzy Controller
This paper proposes frequency speed control of rotary travelling wave ultrasonic motor (TWUSM), type Daimler Benz AWM90-X motor. The control characteristics of TWUSM are complicated, highly nonlinear and varying in time....
Transmission Congestion Management using a Wind Integrated Compressed Air Energy Storage System
Transmission congestion is a vital problem in the power system security and reliability sector. To ensure the stable operation of the system, a congestion free power network is desirable. In this paper, a new Congestion...
Numerical Analysis of Crack Progress in Different Areas of a Friction Stir Welded Bead for an 5251 H14 Aluminum Alloy Specimen
The assemblies welded by Friction Stir Welding have a major advantage which is the absence of a metal filler. This process contributes to the welding of materials that are known to be difficult to weld using the conventi...
Implementation of MPPT Algorithm and Supervision of Shading on Photovoltaic Module
This paper presents an implementation of MPPT (maximum power point tracking) algorithm based on real-time measurements and on model-based simulation. For the supervision of a photovoltaic module, different cases of shadi...