Surface Hardening of 40Cr10 Steel after Short Time Nitriding in Fluidized Bed
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2006, Vol 29, Issue 2
Abstract
The paper is based by nitriding in fluidized bed experiments over laboratory plant. Fluidization applications are characterized by high values of mass and heat transfer coefficients. For experiments were used 40Cr10 (Romanian standard) steel specimens. The fluidization and nitriding processes are simultaneously. The results of experiments were investigated by micrograph, hardness and XRD. Micro Vickers investigated micro hardness profiles in section.
Authors and Affiliations
Adolf BÂCLEA, Sorin DOBROVICI, Elena DRUGESCU, Nelu CAZACU
Keywords
Related Articles
- EP ID EP663519
- DOI -
- Views 60
- Downloads 0
Researches on the Pollution of Underground Waters in a Certain Part of Galati District
The paper underlines the importance of monitoring the quality of the underground waters and presents the experimental results as regards the pollution of underground waters in a certain part of Galati district. The final...
Electrochemical Corrosion Behavior of 7075 Aluminum Alloy after Ageing Treatment
The electrochemical corrosion behavior of 7075 aluminum alloy subjected to different artificial ageing treatments maintaining times was examined. This aluminum alloy is typically used in aerospace structural components s...
Structural Changes Associated with the Pseudoelastic Response of Fe-Based Shape Memory Alloys
The pseudoelastic responses of two types of iron base shape memory alloys (SMAs) were introduced and discussed. The former was based on Fe-Mn-Si system, obtained by classical (CM) and by powder metallurgy (PM) manufactur...
Physico-Chemical Water Treated with Sonic Generator and Al2(SO4)3 Coagulant
This paper is a study on the problem of using ultrasound in the treatment of raw water. It highlights the effect of ultrasounds produced by the experimental sonic ultrasound generator through the physico-chemical analysi...
Laser Surface Alloying of Some Steels from SiC Predeposited Powders
For the purpose of studying the possibilities of increasing the wear resistance, specimens of three steels with 0.2%C, 0.46%C and 1%C were surface alloyed with reinforcement from overlapping pastes with green SiC hard pa...