Synthesis and Characterization of Glass Fiber Reinforced Nano Composite Cylindrical Pipes Using TiO2 Nano Particles

Abstract

Polymer matrix reinforced with fibers and Nano fillers are widely used in automotive, marine, and aerospace and construction industries because of their high tensile and compressive strength, low coefficient of thermal expansion, good fatigue resistance and suitability for the production of complex shape materials. The polymer composite materials are light weight when compared to steel. The commercially made steel pipe are more weight and poor resistance of corrosion and high cost. The nano materials will improve the strength, corrosion and chemical properties. In this research work to studies the effect of TiO2 on E-glass fiber reinforced polymer composite. The Nanocomposite cylindrical pipes were prepared by hand layup technique by varying percentages of TiO2 nanoparticles of 0, 1, 2, 3 and 4 wt% respectively .The distribution of TiO2 in polymer were analyzed using Scanning electron microscope (SEM). The result shows that addition of nano particles enhance the compressive strength 19.62% in the addition of 3wt% TiO2.

Authors and Affiliations

B. Aravinth, A. Thiagarajan, K. Velumurugan, R. Sulaiman

Keywords

Related Articles

Exploring Agriculture Sector Using Crowdsourcing Predictors

India is a nation where agriculture is considered as a basic occupation and the largest source of national growth. Farmer is said to be man of nation. We consider this as our responsibility and prime duty to explore thi...

Power Quality Improvement using Super Capacitor for an Isolated Power Generation

Power generation will be formed in many weak distribution networks, after renewable energy sources are connected to them. It is very important to increase the reliability and efficiency of using these renewable energy s...

Solution of the Generalised Elastic Column Buckling Problem by the Galerkin Variational Method

In this paper, a system of three differential equations describing the generalized elastic column buckling problem for axial compressive load, Nx acting through the centroid of the cross-section; and such that the bimom...

Effect of Yogic Exercises on the Physical Fitness Components of Handball Players

Yogic exercises not only increase the general strength but also tone up the muscles because these exercises stretch out the muscles and due to their slow stretch and hold nature along with breathing mechanism improves t...

Smart Bus Tracking and Management System using Iot

Bus tracking is an application that tracks a bus and gathers the distance to each station along its route. Tracking System involves the installation of an electronic device in a bus, with an installed Android App on any...

Download PDF file
  • EP ID EP22093
  • DOI -
  • Views 220
  • Downloads 4

How To Cite

B. Aravinth, A. Thiagarajan, K. Velumurugan, R. Sulaiman (2016). Synthesis and Characterization of Glass Fiber Reinforced Nano Composite Cylindrical Pipes Using TiO2 Nano Particles. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 4(5), -. https://europub.co.uk/articles/-A-22093