SYNTHESIS AND CHARACTERIZATION OF NEW ALKYD RESINS (SHORT, MEDIUM AND LONG) BASED ON SUNFLOWER OIL AND LINOLEIC ACID AS BINDER FOR PAINTS
Journal Title: International Journal of Chemical & Petrochemical Technology (IJCPT) - Year 2017, Vol 7, Issue 1
Abstract
Alkyd resins include a very high proportion of common binders, which are used in the pants. New alkyd resins were synthesized by reacting (sunflower oil or linoleic acid with poly ethylene glycol or triethanol amine and phthalic anhydride) in the presence of lead oxide as a catalyst. The synthesis of alkyd resins included two stages. The first stage is to convert sunflower oil or linoleic acid to monoglycerides as a polyol by alcoholysis. Esterification process took place in the second stage through adding phthalic anhydride and xylene to the mixture. There were three different kinds of alkyd resins that have been synthesized (Short, medium and long) from sunflower oil or linoleic acid by using different ratios of phthalic anhydride. The various physic-chemical properties of alkyd resins including acid value, saponification value, iodine value, Density, viscosity, chemical resistance and volatile matter were studied. The result is that alkyd resins are readily soluble in aprotic polar solvents such as (Toluene, Acetone, Benzene, xylene, DMF, DMSO, Methanol, and ethanol) without being in need for heating. Thermal analysis of alkyd resins is conducted by using thermo Gravimetric Analysis (TGA) and thermal differential calorimeter (DSC) techniques, which reveals that these Aromatic alkyd resins possess thermal stability. Alkyd resins were characterized by FT-IR and 1HNMR spectroscopies.
Authors and Affiliations
MOHAMMED AIL MUTAR, NOOR MOHAMMED ABDUL HASSAN
Keywords
Related Articles
- EP ID EP222864
- DOI -
- Views 118
- Downloads 0
A STUDY ON SYNGAS PRODUCTION FROM DIFFERENT BIOMASS FEEDSTOCKS
The gasification process usually begins with the drying process, and then followed by pyrolysis. The pyrolysis process leads to breaking down of the biomass into solid matter, the gaseous mixture (mainly CO2, CO, CH4 and...
Graphene as Electrode Material for the Greater Power Generation in Microbial Fuel Cell
The future of energy will dependent majorly on renewable sources; Microbial fuel cell (MFC) technology is a recent and a powerful technology which uses energy present in wastewater to convert into electrical energy with...
DEFLUORIDATION STUDIES OF GROUND WATER USING NATURAL ADSORBENT PREPARED FROM MANGO BARK
Groundwater is counted as a renewable resource and is considered as a major source for fulfilling the exponentially increasing water demand across the world. However this source is depleting with increasing anthropogenic...
AN ECO-FRIENDLY APPROACH FOR ACHIEVING BETTER EXHAUSTION OF THE DYE
In this study an try has been made to enhance the exhaustion of dye with the use of proteolytic enzyme. Dyeing is an vital method in the leather-based enterprise. it is widely recognized that some of the dyes do no longe...
SYNTHESIS AND CHARACTERIZATION OF NEW ALKYD RESINS (SHORT, MEDIUM AND LONG) BASED ON SUNFLOWER OIL AND LINOLEIC ACID AS BINDER FOR PAINTS
Alkyd resins include a very high proportion of common binders, which are used in the pants. New alkyd resins were synthesized by reacting (sunflower oil or linoleic acid with poly ethylene glycol or triethanol amine and...