Synthesis and Characterization of Ni SmxFe2-xO 4 Nano-Ferrites by auto combustion method
Journal Title: International Journal of engineering Research and Applications - Year 2018, Vol 8, Issue 2
Abstract
Ni-Sm Nano ferrites with chemical formula NiSmxFe2-xo4 (x=0.00, 0.010, 0.030, 0.050, 0.070, 0.090 and 0.10) were synthesized by the citrate-gel auto combustion method. Synthesized powders are sintered at 5000C for four hours in air and characterized by XRD, SEM, EDS and FTIR. X-ray diffraction (XRD) analysis showed cubic spinel structure of the ferrites and the values of lattice parameter (a) and X-ray density (dx) increases with the increase of Sm content. Scanning electron microscope (SEM) studies revealed morphology of the Nano crystalline samples. An elemental composition of the sample was studied by Energy Dispersive spectroscopy (EDS). The FTIR spectra shows the two significant absorption bands in the wave numbers range of 370-600cm1 arising due to the inter-atomic vibrations in the tetrahedral and octahedral coordination compounds The observed results can be explained on the basis of composition
Authors and Affiliations
Gopal boda, Nehru Boda, Meravath Bhanu, A. Panasa Reddy, D. Ravinder
Keywords
Related Articles
- EP ID EP393717
- DOI 10.9790/9622-0802021721.
- Views 113
- Downloads 0
Restrained Early Age Shrinkage At The Vertical Interface Between Freshcementitious Mixtures And Hardened Substratespart-I
Casting fresh cementitious materials against a hardened concrete substrate is common for most concrete constructionin repair and retrofitting, leading to cold-joints or construction joints. The potential for problems to...
Effects of Machining Parameters on Cutting Forces during Turning of Hardened AISI 52100 Steel using PCBN Tooling
The motivation of this investigate is to study the effects of machining parameters on the cutting performance of hard turned parts with PCBN (polycrystalline cubic boron nitride) tools , in wholly dry cutting. The data o...
In-Vehicle Stress Monitoring Based on EEG Signal
In recent years, improved road safety by monitoring human factors i.e., stress, mental load, sleepiness, fatigue etc. of vehicle drivers has been addressed in a number of studies. Due to the individual variations and com...
Internet of Things (Iot) To Conference Efficiency and Economy In The Application of Agricultural Supplies
Food production has become a global concern and has attracted the attention of agribusiness producers and entrepreneurs in light of forecasts of rising demand, which is expected to reach 9 billion consumers by 2030. Give...
Soft Computing Technique for the Control of Triple-Lift Luo Converter
Positive output Luo converters are a series of new DC-DC step-up (boost) converters, which were developed from prototypes using voltage lift technique. These converters perform positive to positive DC-DC voltage increasi...