Synthesis, Characterization and Properties of Ni–Cu–Zn NanoCompositE
Journal Title: International Journal of engineering Research and Applications - Year 2018, Vol 8, Issue 6
Abstract
This research article describes the magnetic properties of nano-composite composition as Ni0.75−2x Cu0.1+x Zn0.15+x Fe2O4 (0.01≤ x≤ 0.05), synthesized by a simple method using metal nitrates and citrate precursor method. X-ray Diffraction measurements (XRD) justified the formation of single-phase cubic spinel structure. The average crystallite size has been calculated using XRD pattern and the same is confirmed by Scanning Electron Microscope (SEM). The nearly constant lattice parameters obtained with copper substitution is attributed to the small difference in the ionic radius between Ni2+ and Cu2+ ions. The effect of copper and zinc concentration on the magnetic properties is investigated using Vibrating Sample Magnetometer (VSM). Through the magnetic measurements it can be observed that the entire preparation method increases the magnetic properties of the Nano-composite material. The NiCuZn Nano-composite with increased copper and zinc molar ratio are observed to have better magnetic properties compared to available NiCuZn Nanocomposite.
Authors and Affiliations
T. Narasimhulu, Mallikarjuna Rao. Pasumarthi
Keywords
Related Articles
- EP ID EP394412
- DOI 10.9790/9622-0806041720.
- Views 91
- Downloads 0
Design and Analysis of an Excavator Bucket
An excavator is a run of the mill water driven substantial obligation human-worked machine utilized as a part of general adaptable development operations, for example, burrowing, ground leveling, conveying loads, dumping...
A Study on Atomic Spectroscopic Term Symbols for Nonequivalent Electrons of (n-1) d 1 s 1 p 1 Configuration Using RussellSaunders Coupling Scheme
Electronic and magnetic properties of the inorganic molecules and complexes can be understood very well by using the term symbols. Term symbols are a shorthand method used to describe the energy, angular momentum, and sp...
Development Of Low Cost Batch Drier To Enhance Value Chain Cassava Chips Production
A small size cassava chips batch dryer was designed, constructed and evaluated at the Department of Agricultural and Bio-Environmental Engineering of the Federal Polytechnic, Ado Ekiti. The system consists of the followi...
Proposed Automatic Spark Gap Adjustment System for a Tabletop Micro Edm
EDM is an electro-thermal non-traditional machining process.This technology is increasingly used due to the requirement of high precision, complex shapes and high surface finish.After conducting a literature review on th...
Study on Treatment of Leachate from Landfill
A study was the investigated based on the leachate treatment which one of the apply to the coagulationflocculation and Fenton process in the sequences of our process. Two types of the coagulant used: (i) aluminum sulphat...