Synthesis of catalytic cobalt-containing coatings on alloy AL25 surface by plasma electrolytic oxidation

Abstract

The study aims at the investigation of the influence of electrolyte composition and plasma electrolytic oxidation modes on the composition and morphology of a mixed aluminum and cobalt oxides at the AL25 alloy. Composition, morphology and surface roughness of the oxide systems are examined by scanning electron microscopy, X-ray analysis and atomic force microscopy. Mixed oxide coatings Al2O3·CoOx formed from the diphosphate electrolytes at various concentration ratio diphosphate / cobalt sulfate contain cobalt of 8–30at. % (in terms of metal) in the matrix of alumina. Plasma electrolytic oxidation in a two-stage mode of the incident power provided formation ofstrongly adhered coatings characterized by non-stoichiometry ratio of cobalt and oxygen as well as low content of silicon in deposits. Obtained mixed oxide systems have developed surface with alternating the spheroid and torus-shaped structures which is associated with a large number of catalytic sites. They exhibit catalytic behavior in the model reactions of CO conversion to CO2 and benzene oxidation not inferior to the contacts with noble metals. The coatings Al2O3·CoOx contribute to fuel economy and improve the environmental performance of the internal combustion engine thus can be recommended for use in the neutralization of gas emissions systems and as coatings for pistons of combustion chamber.

Authors and Affiliations

M. V. Ved', A. V. Karakurkchi, N. D. Sakhnenko, A. S. Gorohivskiy

Keywords

Related Articles

Composite on the basis of hydrated zirconium dioxide and graphene oxide for removal of organic and inorganic components from water

The aim of the investigation is to develop multifunctional adsorbent, which is able to remove both inorganic ions and molecular organic substances from aqueous solutions. Oxidized graphene has been obtained by Hammer’s m...

Synthesis of catalytic cobalt-containing coatings on alloy AL25 surface by plasma electrolytic oxidation

The study aims at the investigation of the influence of electrolyte composition and plasma electrolytic oxidation modes on the composition and morphology of a mixed aluminum and cobalt oxides at the AL25 alloy. Compositi...

Synthesis of multilayer azagraphene and carbon nitride oxide

As an one of the most promising materials of green energy as a photocatalyst for the production of hydrogen from renewable, natural sources (water, greenhouse gas) and environmental remediation through the degradation of...

Поведение метана и органических растворителей с низкой точкой замерзания на границах раздела при взаимодействии с гидрофильным и гидрофобным кремнеземом

Характеристики фазового состояния адсорбированного вещества при изменении температуры часто неизвестны из-за влияния эффектов ограниченного пространства в порах адсорбентов на связанные с поверхностью соединения. Теория...

Influence of thermolysis in the nitrogen medium on physicochemical properties of medical using material based on biogenic hydroxyapatite

Physicochemical properties and adsorbtion activity of biogenic hydroxyapatite-based (BHA) osteoapatite material and BHA alloyed by ferromagnetic particles due to using two methods of physicochemical mixing with subsequen...

Download PDF file
  • EP ID EP247329
  • DOI 10.15407/hftp08.01.073
  • Views 136
  • Downloads 0

How To Cite

M. V. Ved', A. V. Karakurkchi, N. D. Sakhnenko, A. S. Gorohivskiy (2017). Synthesis of catalytic cobalt-containing coatings on alloy AL25 surface by plasma electrolytic oxidation. Хімія, фізика та технологія поверхні, 8(1), 73-79. https://europub.co.uk/articles/-A-247329