Synthesis of digital radio receiver system for secure communication with frequency-hopping spread spectrum
Journal Title: Вісник Тернопільського національного технічного університету - Year 2017, Vol 85, Issue 1
Abstract
It was represented the results of synthesis and modeling of work of digital receiver based on the digital down converter (DDC), and a digital signal processor (DSP), which are used to process received signals. The method of constructing narrow-band receiver with digital filtering, demodulation and signal processing, the results of its use in digital radio with frequency-hopping spread spectrum (FHSS mode) is discussed
Authors and Affiliations
Mykhailo Palamar, Andrii Chaikovskyi, Volodymyr Kruglov
Keywords
Related Articles
- EP ID EP257695
- DOI -
- Views 74
- Downloads 0
The fractography features of fracture of the 2,25CR-1MO steel after creep test
The unstable properties of steels for the large construction during long term operation are one of the reasons of loss of oil equipment workability. High operating temperature, strain and hydrogenating technological envi...
Transmission of torque from the system of a hard stamps to the contour of a circular hole in an infinite plate
Contact interaction of hard stamps with angular points and massive elastic bodies with circular cylindrical holes is investigated in this article. Refined interaction model considers the initial difference of curvature o...
Ways to save fuel and energy resources in daily graft
Through experience it has been set the influence of various types of heat sources (gas stove for 4 burners, induction cooktop and electric kettle), volumes of water, the diameter of gas stove burners (55 mm, 75 mm, 100 m...
Determination of non-intensive light flux intensity after propagation through layered biological environment
The results of the research of the problem of determining the intensity of the light flux of low intensity after its propagation through the layered bioenvironment are given. It was defined that the transfer of radiation...
Technology in developing the innovative element base in the form of spherical hinges for the spatial drives system
The technological process of manufacturing the effective spherical joints of the spatial drive systems was developed. It is based on the formation of spherical surfaces of the hinge using the polymer-metal composite. The...