Target detection in pulse-Doppler radar based on multi-scanning signal integration
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2013, Vol 0, Issue 53
Abstract
Introduction. Development of multi-scanning signal integration algorithms for pulseDoppler radars which are widely used in practice is of great practical importance. Problem statement. The problem of multi-scanning signal integration measuring range and range-rate is considered. The reflected signal from a target is a distorted white noise coherent packet of radio pulses with random initial phase and known amplitude. Target detection in a sequence of radar scans is reduced to the detection of target track. Development of a two-step multi-scanning incoherent signal integration algorithm. Two-step integration method is applied to reduce the number of tracks. In the first stage the initial signals detection with a sufficiently high probability of false alarm is performed. In the second stage the tracking problem for selection target markers is solved and the multiscanning signal integration is implemented. It provides an optimal target detection solution over K surveys with low signal-to-noise ratio. Expressions for the correct target detection probability and false alarm incorporating quality track tracking are obtained. Simulation results. Analysis of the algorithm is carried out as example of the little maneuvering target detection using the statistical modeling. The methods of calculating the output threshold (the cumulative statistics are compared on it) is presented. Conclusions. Increasing the number of scans (in which the integration are performed) leads to a significant decreasing the probability of false alarm, which allows to increase the signal-to-noise ratio compared with the detection in a single scan up to 3.5 dB.
Authors and Affiliations
O. Neuimin, S. Zhuk
Keywords
Related Articles
- EP ID EP309087
- DOI 10.20535/RADAP.2013.53.89-97
- Views 80
- Downloads 0
The raising effective of the operation executor’s devices for the radio electronics apparatus
The consideration of development and design of the electronics devices for the effective operation with use shape of the electric current. The presents of calculation of the time intervals variation current with the help...
Near-field open coaxial sensor. Measurement aperture spatial resolution ability evaluation
Microwave sensors find wider and wider application in the different domain. The sensors design became more complicated, the methods of their description became more exact.The paper presents a simplified model for describ...
About degradation of uncertainty function broadband signal with the linear inside impulse frequency modulation
The increase tendency bandwidth conducts today behind itself revision of the theory which has developed Woodward as it is not calculated for broadband signals. In the given work was such case which shows discrepancies in...
Investigation of the resonance absorption of bioobjects mm-radiations
The results of investigation of absorbing capacity of cereals, water and human skin in mm-wave band are presented.
Signals Features from Distributed Targets of Autodyne SRR with Simultaneous Pulse Amplitude and Linear Frequency Modulations
A mathematical model for signals description of the autodyne short-range radar (ASRR) with the simultaneous pulse amplitude modulation (PAM) and the linear frequency modulation (FM) is considered. The peculiarities of si...