Techno-Economic Justification of Reparatory Hard Facing of Various Working Parts of Mechanical Systems
Journal Title: Tribology in Industry - Year 2014, Vol 36, Issue 3
Abstract
Research in the field of hard-facing of various parts mechanical systems' are being done for technical and techno-economic reasons. The reasons for introducing the new reparation technologies by hard-facing are numerous: three quarters of all the mechanical parts of engineering could be regenerated or manufactured by hard facing; the working life of the repaired part reaches or even exceeds the working life of a new part, while the working life of the hard faced manufactured part surpasses several times the working life of the new part manufactured by some other technology. Large number of damaged and, frequently even broken parts, cause terminations of the working process. Thus, due to difficulties in procurement of new, mainly imported parts, the alternative solution must be applied. It is sown that the a proper choice of the hard-facing technology is related to the complex procedure of checking the quality of the hard faced layer, what indicates that the reparatory operations could be performed only in specialized regeneration workshops, which are furnished with adequate equipment and corresponding expert and skilled staff. The estimated net benefit for the analyzed parts is exceptionally high, regardless of the fact that the additional external and internal effects have not been quantified.
Authors and Affiliations
V. Lazić , R. Čukić , S. Aleksandrović , D. Milosavljević , D. Arsić , B. Nedeljković , M. Đorđević
Keywords
Related Articles
- EP ID EP142429
- DOI -
- Views 63
- Downloads 0
Corrosion Rate and Wear Mechanisms Comparison for Aisi 410 Stainles Steel Exposed to Pure Corrosion and Abrasion-corrosion in a Simulated Marine Environment
Due to its diversity of applications in mechanical components such as; pumps, valves and turbine parts, AISI 410 stainless steel is exposed to combined conditions of wear and corrosion. Although several works have been c...
Optimization of CO2 Laser Cutting Process using Taguchi and Dual Response Surface Methodology
Selection of optimal cutting parameter settings for obtaining high cut quality in CO2 laser cutting process is of great importance. Among various analytical and experimental optimization methods, the application of Taguc...
Simulation of Anti Wear Performance Using a Modified Brugger Test Set Up
Modern hydraulic oils have to fulfill a broad variety of parameters limitations to guarantee a proper system performance throughout a considerable lifetime. A comprehensive test of the liquids nowadays just can be perfor...
Influence of Composition of Plant Oils on Their Tribological Properties
Sunflower, corn, rapeseed, olive, and linseed oils were used for investiga-tion. Their fatty-acid compositions have been evaluated by gas chroma-tography. The tribological properties were determined with a four-ball mach...
Methods and Principles of Determining the Footwear and Floor Tribological Characteristics
There are many standards relating to the anti-slip properties of footwear and flooring. These standards describe the different test methods and procedures for determining the footwear and floor slip resistance in differe...