Tensile Properties and Strain Response of Cu-Al Bi-Metal Tube
Journal Title: Jurnal Kejuruteraan - Year 2014, Vol 26, Issue 1
Abstract
Recent high price of copper in global market forced the heat, ventilation, and air condition (HVAC) industry players to find alternative materials with relatively lower market price compared to copper such as aluminium for replacement. This study characterizes tensile properties and strain response of new Cu-Al bi-metal tubes i.e. aluminium cladded copper (ACC) and copper cladded aluminium (CCA) in order to look at the possibility of applying the bi-metal tubes in HVAC industries. The result shows that tensile properties of CCA tubes was higher than that of ACC bi-metal tubes in two different strain rates of 1 × 10-3 and 1 × 10-1 sec-1. Also, Strain response refers to the sample elongation at break shows a higher elongation value of CCA samples compared to ACC.
Authors and Affiliations
A. H. Baghdadi . , I. S. Misran . , Z. Sajuri . , J. Syarif .
Keywords
Related Articles
- EP ID EP417708
- DOI -
- Views 83
- Downloads 0
Optimising Cutinase Enzyme Recovery in Thermo-Induced Phase Separation of LS54/DX ATPS by Enhanced Volume Exclusion Effect
Low recovery of cutinase enzyme in water-enriched phase after thermo-induced separation stage of LS54/Dx aqueous two-phase system was improved by enhanced volume exclusion effect in the polymer-water extraction system. I...
Pembahagi Frekuensi Berkuasa Rendah Menggunakan Teknik Pincang Badan ke Depan (Low Power Frequency Divider Using Forward Body Bias Technique)
Aplikasi tanpa wayar seperti telefon selular, radio dua-hala dan wifi telah menggunakan sepenuhnya teknologi penghantar-terima yang terkini. Unit penghantar-terima yang terdiri daripada penghantar dan penerima merupakan...
Vortex Measurement at Bell-Shaped Pump Inlet Using Particle Image Velocimetry
The vortex formed at the pump intake is known to be the main factor affecting the performance of a pump and it contributes directly to the increase of energy consumption. This study was aimed at obtaining an in-depth vis...
Modelling of Elastic Modulus Degradation in Sheet Metal Forming Using Back Propagation Neural Network
The aim of this study is to develop an elastic modulus predictive model during unloading of plastically prestrained SPCC sheet steel. The model was developed using the back propagation neural networks (BPNN) based on the...
Analisis Penyerakan Isyarat Gelombang Mikro Elemen Gelung Segi Tiga dari Pelbagai Jenis Filem Pengalir Lutsinar pada Jalur-Ku (Scattering Microwave Signal Analysis from Triangular Loop Element of Different Transparent Conductive Thin Films at Ku-band)
A study on the performance of scattering Ku-band microwave signals from an element designed with triangular loop shape made of different types of conductive thin fi lm is presented in this paper. In this study, four type...