THE ANALYSIS AND MODELING OF QUEUES FORMING AND PROCESSING IN THE NETWORK DEVICES
Journal Title: Вісник Національного університету "Львівська політехніка", серія "Радіоелектроніка та телекомунікації" - Year 2013, Vol 766, Issue 2013
Abstract
The investigation has covered buffer resource and queue management as main and the most important network traffic parameter and access control and overload mechanism. Network devices interaction model can performed by three levels: physical layer; protocols layer; queues consolidating two previous levels. The basic mechanisms of processing queues have been examined. The rules, that packages in queue are processed according to, are called queues management algorithms. The requirements for processing queues mechanisms have been defined. The formation and processing network queues analysis and modeling mechanisms have been presented. After reading the main points of the mechanisms of formation and queuing, simulation model of queuing in multiservice network using data prioritization has been developed. The model has been implemented in a Matlab software environment. The number of packages in the buffer has been calculated according to Norros formula. Every algorithm evaluation creterion is the ability to best quality service for each service providing the best parameters QoS. Simulation results comparative analysis has been carried out. For more detailed analysis of the service parameters quality, the results of different types algorithms for multiservice network are presented. QoS parameters, such as the probability of packet loss, delay and jitter, were determined for different flows with appropriate algorithm. It was determined that the FIFO algorithm is unacceptable for service data. PQ algorithm was designed to process high priority flows. The best simulations results showed WFQ algorithm, which can satisfy acceptable service quality according to all parameters. The presented model makes it possible to choose the optimal queues algorithms for different services. This approach can be used on design stage, and also on increasing the network efficiency stage.
Authors and Affiliations
Maryan Kyryk, Nazar Pleskanka, D. Kozhurov
Keywords
Related Articles
- EP ID EP461007
- DOI -
- Views 124
- Downloads 0
THERMODEGRADATION EFFECTS IN THICK-FILM ELEMENTS BASED ON SPINEL CERAMIC OF Cu- AND Co-ENRICHED COMPOSITIONS
The modern state-of-the-art and perspectives to resolve the problem on negative temperature coefficient thermistor element for sensor electronics were analyzed. It was shown that thick-film technology in application to m...
METHODS OF INCREASE NOISE IMMUNITY TELECOMMUNICATION SYSTEMS OF DATA TRANSMISSION MAINS ON OF THE POWERLINE
Considered the influence of industrial noise on symmetric lines PowerLine at their use to create multichannel systems. Proposed compensation method to reduce the impact of industrial noise on such systems. For today acti...
NARROWING THE WIDTH OF THE SENSITIVE AREA OF MICROWAVE DOPPLER RADAR
The paper presents a way of narrowing the width of the sensitive area of radio-wave Doppler sensor. This is important when the sensor is used for oscillating measuring or biomedical research to eliminate the influence of...
RESEARCH OF THE EFFICIENCY OF THE CDN NETWORK
The network architecture of the content delivery network (CDN) and methods of the load balancing were examined in this paper. We have described the algorithm of end users’ request routing which allows selecting the optim...
ALGORITHMS FOR ROUTING AND QUALITY OF SERVICE MESSAGES MULTI-SERVICE NETWORK CONNECTION
This paper considers the options for combining routing algorithms in a single method for multiservice communication networks. For a comparative analysis of the quality of service communications multiservice communication...