The analysis of friction effect on equal channel angular pressing (ECAP) process on Aluminium 5052 to homogeneity of strain distribution
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 2, Issue 1
Abstract
<p class="SDRMText">In the current study, the effect of friction coefficient on strain distribution and deformation was investigated with the computer simulation providing a better understanding of the material flow mechanism and deformation behavior in the ECAP. The 10×10 mm and 50 mm-long rectangular billet was used as the geometry of aluminum material. The geometry of dies is 105° channel angle, 0 mm inner fillet radius, and 5 mm outer fillet radius. The dies were modeled as rigid bodies, and the specimen was assumed as a bilinear hardening model. The effect of friction was investigated with the three-level variation coefficient of friction (0.01; 0.025 and 0.05). Based on the result, it can be shown that the friction affects the strain distribution condition. The friction of 0.05 produced more uniform strain distribution, better homogeneity, and smaller corner gap. The experimental study of modeling results was done with MoS2 lubricant while the strain distribution was verified by the microhardness test. The microhardness distribution test result was similar to strain distribution from modeling.</p>
Authors and Affiliations
Aminnudin Aminnudin, Pratikto Pratikto, Anindito Purnowidodo, Yudy Surya Irawan
Keywords
Related Articles
- EP ID EP527847
- DOI 10.15587/1729-4061.2018.127006
- Views 74
- Downloads 0
Revealing special features of hydrodynamics in a rotor-disk film vaporizing plant
This paper reports the generalized results of computer simulation of physical processes at a rotor-disk film evaporating plant. Optimization of the operation mode cannot be achieved without establishing patterns in the c...
Theoretical and applied aspects of using a thermal pump effect in gas pipeline systems
<p class="a">Based on the classical method for calculating parameters of gas pipelines using electrohydraulic analogy, a mathematical model of the object, the process of gas transmission in an industrial pipeline, has be...
Identification of special features in the electrolysiscavitation water treatment in pools
<p>We developed an innovative technology of electrolysis-cavitation water purification and water treatment in pools. This method belongs to the group of physical water purification methods and its advantage is the absenc...
Determining the regions for efficient use of electrojet lowthrust engines
<p>This work addresses the issues on determining the optimal regions for using propulsion system for spacecraft at low near-Earth orbits. An analysis of spacecraft launches over the past 5 years has been performed. The r...
Development of complex-structure ore deposits by means of chamber systems under conditions of the Kryvyi Rih iron ore field
<p>In order to keep their positions in the world markets, mining enterprises of the Kryvyi Rih iron ore field using the deep-mine method need to develop a resource-saving technology for the development of the fields repr...