The attempt at evaluation of the ADI microstructure with the use of the image analysis
Journal Title: Archiwum Odlewnictwa - Year 2010, Vol 10, Issue 2
Abstract
In this work the attempt at quantitative evaluation of the microstructure of ADI cast iron matrix has been made. The automatic analysis of the image of the microstructure of austempered spheroidal cast iron has been used for the evaluation. The treatment variant was a two-phase austenitization. First phase was carried out at a temperature t = 950°C and after cooling to a temperature t ’ = 900°C. The isothermal process was carried out at a temperature tpi = 300 and 400°C for 8÷64 min. Ordinary cast iron was austempered. After it the microstructure images were recorded and subjected to automatic image analysis with the use of the NIS ELEMENTS 3,0 AR software.
Authors and Affiliations
T. Giętka, S. Dymski
Keywords
Related Articles
- EP ID EP72249
- DOI -
- Views 129
- Downloads 0
Compression effect and the structure of liquid eutectic
ExperimentallyT Tinvestigated theT TtemperatureT Tdependence ofT Tthe densityT and Tthermoelectric power ofT Tthe eutecticT TmeltT. TBased on theT TresultsT TandT Tstructural modeling,T Tto explain the effectT Tof compre...
Possibilities of improving the durability of pressure moulds
Possibilities of improving the durability of pressure moulds
The analysis of the wax foundry models fabrication process for the CPX3000 device
The paper presents possibilities of creating wax founding models by means of CPX3000 device. The device is used for Rapid Prototyping of models made of foundry wax in an incremental process. The paper also presents probl...
Fatigue strength of MAR-M509 alloy with structure refined by rapid crystallization
This study presents test results of high-cycle (N>2⋅107) fatigue bending strength of MAR-M-509 cobalt alloy samples, as cast and after surface refining with a concentrated stream of heat. Tests were conducted on samples...
Computer aided process of dimensional distortion determination of bounded plaster sandmix
A computer program allowing calculation of dimensional changes of mould made of silica-gypsum composition in process of its heat treatment and preparation for molten metal casting is presented in this paper. The composit...