The Behavior of an Experimental Model of Wind Turbine with Vertical Axle with Overlapped Cups at Low Wind Speeds
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2017, Vol 40, Issue 4
Abstract
This work is based on an experimental model of vertical axis wind turbine (VAWT), which used a pair of hemispherical blades (cups) with variable overlap. Maintaining the rotation speed to a constant value and in order to meet an important criterion for a current generator fitted to the shaft via a speed multiplier is achieved with a centrifugal mechanism. The experiments conducted in laboratory conditions using experimental model wind tunnel at speeds below 4.5 m/s confirm the validity of the concept.
Authors and Affiliations
Nelu CAZACU
XRD Analysis in Front of a Corrosion Crack Tip
During exploitation of the heat exchangers some damages can appear in the contact region between the gaskets and the stainless steel walls. The studies upon the material were performed using SEM microscopy, X-ray diffrac...
The Actionnary System of the Continnous Discharge Furnace From L.T.G -1. Mittal Steel
In this study the authors made a systematically research about the actionnary system at the continuous discharge heating furnace. It take in account the possibility to use a new material, with most good wear resistance,...
Characterisation of CVD Niobium Carbide Coatings on Hard Carbide Substrate
Hard coatings are often used for mechanical properties such as wear and friction resistance. The corrosion behaviour may also be an important criterion for industrial applications of these coatings. In this paper, the pr...
Development of Blade Design for Small Hawt Adapted for Lower Values of Wind Speed
The paper aims at studing, theoretically and experimentally, the influence of turbines blade profile on output power, in order to decrease effective domain to smaller wind speed, specific to Galati area. Studies have bee...
Air Pollution Control
Air pollution is an important issue nowadays, and combustion plants have a significant contribution in this regard. In this paper we are going to present some of the techniques that can be used to avoid creating pollutan...