The character of cracking in the beams with loop joints
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2018, Vol 1, Issue 71
Abstract
In connection with rather wide distribution of prefabricated-monolithic reinforced concrete in Ukraine, there was a need to increase areas of using various joints, in particular joints of reinforcement without welding. The loop joint (Perederiya joint) represents the releases of the armature from the ends of the elements in the form of concentric loops forming rings. The concrete in the space between the rings works on a comprehensive compression. Laboratory studies in this direction made it possible to add a certain picture of the cracking of test specimens with loop joints. The majority of researchers noted the intensive formation and development of cracks along the contour of contact between old and new concretes in the zone of the loop joints under various loads. And most of the existing recommendations are aimed at reducing cracking in such zones. In view of poor knowledge of the issue, it was decided to test the crack resistance of the splined loop joint in comparison with the keyless. The nature of the formation and development of cracks were established. Cracks are concentrated in the middle of the span in the place of the loop joint. In general, normal cracks were observed, but horizontal cracks also occurred. Cracking in samples with loop joints began with the appearance of hair cracks in the stretched zone in the middle part of the span and at the border of beams and joints concrete. Due to the jagged form of the keyed joint, the development of a crack along the border of old and new concrete in such joints was delayed at the tops of the «teeth».
Authors and Affiliations
V. V. , Malakhov, S. М Vykydanets
Keywords
Related Articles
- EP ID EP510603
- DOI -
- Views 132
- Downloads 0
Analysis thermomechanical processes in asphalt road layers
The existing practice of design calculation of road pavements demands improvement in methods of temperature change forecasting in each layer considering the actual thermophysical characteristics of materials, and improve...
Full-scale test of conveyor gallery’s span for stiffness control
The results of full-scale test of conveyor gallery’s span for stiffness control in building conditions and numerical work are given. In 2016-2017 at grain terminal’s building near ‘Yujniy’ port assemblage of metalware wa...
Use of integral calculus for building developments of undevelopable surfaces of revolution
Generally, students of architecture use rather simple geometric elements: planes, prisms, cylinders, etc to represent their architectural decisions with paper and card models. However, nowadays modern architects are tryi...
Fibre-reinforced decorative composite: the effects of composition on the strength
The paper continues to present the results of the study aimed at getting high performance decorative concrete. To the previously presented analysis of the influence of the composition on the growth process of the plastic...
Determination of the lattice optimal geometric shape in the combined arch system for circular plan buildings
The methodology of determining the optimal geometric shape of the lattice in the combined arch system was developed under conditions of tensile capacity of all elements of the flexible lattice and the minimum material co...