The comparative analysis of blind identification methods of systems and signals
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2011, Vol 0, Issue 45
Abstract
In work the comparative analysis of blind identification methods of MIMO (SIMO) - systems which is new technology of digital processing of signals is presented. This technology is used in the conditions of incomplete definiteness of parameters of object of identification. The basic method for the decision of the given problems is the method of the maximum likelihood, the method of mutual ratio is most effective under condition of the big ratio a signal/noise, and a method channel subspace for small dimensions of sample yields results which practically coincide with a method of mutual ratio, and a method channel subspace for small dimensions of sample yields results which practically coincide with a method of mutual ratio
Authors and Affiliations
A. Opolska
Keywords
Related Articles
- EP ID EP309264
- DOI 10.20535/RADAP.2011.45.58-65
- Views 76
- Downloads 0
Increased noise signal processing in incoherent radar systems
Introduction. The work is devoted to the method of increasing coherence and noise immunity pulse radar systems with incoherent sources probing signals. Problem. Incongruities between a resolution and a range of pulsed ra...
Mechanical Values Transformer on the Surface Acoustic Waves
Calculation of parameters of the membrane type mechanical values transformer into the frequency electric signal is rewired. The article deals with the issues of deformational and heat sensitivity. Results of research are...
Simplify method of the calculation capacity accumulation
This article presents the simplify method of the capacity accumulation parameters finding, with make use of nomogrumes.
Helicon isolator transient studies
Introduction. Design of modern powerful transistor generators with external exitation in meter and decameter wave ranges requires maximum utilisation of the transistor power capabilities. Transistors have no margins on t...
Modeling and rapid method measurement diagram RCS horn antennas
Introduction. The development of new technology and reliable operation of radio systems requires knowledge of the scattering of radio waves by radar targets. For solids of complicated form there is no sufficiently accura...