The Comparison of Different Surface Preparation Methods in Terms of Shear Bond Strength of Tri-ceram Porcelaintitanium Alloy
Journal Title: Meandros Medical and Dental Journal - Year 2019, Vol 20, Issue 2
Abstract
Objective: Several studies have been made to evaluate effects of the surface preparation on shear bond strength (SBS) of titanium-porcelain complex. However, a completed picture has not been obtained yet. Therefore, such studies appear frequently on recent literature. The purpose of this study is to determine a simple method providing strong SBS and using fewer parameters. Materials and Methods: Sixty titanium samples were equally divided into five groups. Group 1: Control (C). Group 2: Airborne-particle abrasion with 250 μ Al2O3 (250 μ AbPA). Group 3: Etching with 10% HCl (10% HCl). Group 4: Etching with Nd:YAG Laser at 6W (Nd6). Group 5: Etching with Nd:YAG laser at 7 W (Nd7). Results: Mean SBS value of C (10.69 MPa) was close to that of 250 μ AbPA (10.57 MPa). The mean value of 10% HCl (19.37 MPa) was nearly twice higher than C, whereas those of laser groups (8.89 MPa and 8.77 MPa) were smaller than C. There was no overlap between SBS values of samples etched with 10% HCl and those of other samples. Multiple comparisons indicated a significant difference between acid group and others (p=0.00). Laser groups were different from control, too. The failure mode of % HCl group was 67% adhesive and 33% mix, while those of other groups were cohesive or mix. Conclusion: Titanium surfaces etched with 10% HCl provides significantly strong SBS values. This method requires only the use of aqueous solution of 10% HCl, and boiling process for 30 minutes. Such a simplicity suggests that etching with 10% HCl provides a very simple surface preparation method which involves in use of fewer parameters.
Authors and Affiliations
Berivan Dündar Yılmaz, Ayşe Meşe, Eylem Kaya
Keywords
Related Articles
- EP ID EP50522
- DOI 10.4274/meandros.galenos.2018.70783
- Views 259
- Downloads 0
Effect of Universal Shade of Resin Cement on the Final Color of Ceramic Restorations
Objective: To investigate the effect of neutral (N) and universal (Un) shade resin cement on the final color of thin ceramic restorations. Materials and Methods: Forty specimens (8×8×0.8 mm3) were sliced from five leuci...
The Prevelance of Low Back Pain and Risk Factors Among Nurses Working in a University Hospital: A Cross Sectional Study
Objective: Aim of the study is to determine the incidence of low back pain (LBP) and risk factors in nurses working in a university hospital. Materials and Methods: This cross-sectional study was conducted in 253 nurses...
Comparison of the Load-bearing Capacities of Monolithic PEEK, Zirconia and Hybrid Ceramic Molar Crowns
Objective: Although polyether ether ketone (PEEK) shows high biocompatibility in prosthetic dentistry, there is inadequate information about its clinical applications and limits. The purpose of this study was to compare...
Percutaneous Endoscopic Gastrostomy Experience in A Tertiary Intensive Care Unit
Objective: Percutaneous endoscopic gastrostomy (PEG) is a procedure performed for nutrition in patients whose gastrointestinal system functions are impaired. This study aimed to evaluate patients who were treated in our...
Investigation of Metacarpal Bone Morphology in Normal-weight, Overweight and Obese Adolescent Subjects
Objective: The prevalence of childhood and adolescent overweight and obesity is increasing in most developed countries. This study aimed to investigate the metacarpal bone morphology in normal-weight, overweight and obes...