The Comparison of Different Surface Preparation Methods in Terms of Shear Bond Strength of Tri-ceram Porcelaintitanium Alloy
Journal Title: Meandros Medical and Dental Journal - Year 2019, Vol 20, Issue 2
Abstract
Objective: Several studies have been made to evaluate effects of the surface preparation on shear bond strength (SBS) of titanium-porcelain complex. However, a completed picture has not been obtained yet. Therefore, such studies appear frequently on recent literature. The purpose of this study is to determine a simple method providing strong SBS and using fewer parameters. Materials and Methods: Sixty titanium samples were equally divided into five groups. Group 1: Control (C). Group 2: Airborne-particle abrasion with 250 μ Al2O3 (250 μ AbPA). Group 3: Etching with 10% HCl (10% HCl). Group 4: Etching with Nd:YAG Laser at 6W (Nd6). Group 5: Etching with Nd:YAG laser at 7 W (Nd7). Results: Mean SBS value of C (10.69 MPa) was close to that of 250 μ AbPA (10.57 MPa). The mean value of 10% HCl (19.37 MPa) was nearly twice higher than C, whereas those of laser groups (8.89 MPa and 8.77 MPa) were smaller than C. There was no overlap between SBS values of samples etched with 10% HCl and those of other samples. Multiple comparisons indicated a significant difference between acid group and others (p=0.00). Laser groups were different from control, too. The failure mode of % HCl group was 67% adhesive and 33% mix, while those of other groups were cohesive or mix. Conclusion: Titanium surfaces etched with 10% HCl provides significantly strong SBS values. This method requires only the use of aqueous solution of 10% HCl, and boiling process for 30 minutes. Such a simplicity suggests that etching with 10% HCl provides a very simple surface preparation method which involves in use of fewer parameters.
Authors and Affiliations
Berivan Dündar Yılmaz, Ayşe Meşe, Eylem Kaya
Keywords
Related Articles
- EP ID EP619875
- DOI 10.4274/meandros.galenos.2018.70783
- Views 129
- Downloads 0
Prevalence and Distribution of Developmental Dental Anomalies in Pediatric Patients
Objective: The objective of this study was to evaluate the prevalence of dental anomalies in paediatric patients attending the Department of Paediatric Dentistry, Kırıkkale University Faculty of Dentistry. Materials and...
Pseudothrombocytopenia in Case of Acute Viral Hepatitis A
Pseudothrombocytopenia is a laboratory-based iatrogenic phenomenon. Pseudothrombocytopenia is not important in terms of bleeding and does not require transfusion of thrombocytopenia. If not identified at the early stages...
Selexipag: A New Treatment Agent for Pulmonary Arterial Hypertension
Pulmonary arterial hypertension (PAH) is a rare disease which is characterized by the progressive increase of pulmonary arterial pressure. PAH can lead to right cardiac insufficiency and death. Conventional and other tre...
A Rare Cause of Paresthesia: Hypophosphatemia
Phosphate is a structural molecule for cells and also is used as coenzyme or as seconder messenger. Renal or gastrointestinal loss of phosphate, diabetes mellitus, chronic alcoholism, hyperparathyroidism, sepsis, increas...
The Comparison of Different Surface Preparation Methods in Terms of Shear Bond Strength of Tri-ceram Porcelaintitanium Alloy
Objective: Several studies have been made to evaluate effects of the surface preparation on shear bond strength (SBS) of titanium-porcelain complex. However, a completed picture has not been obtained yet. Therefore, such...