The control algorithm DC-DC converter for the field weakening tools
Journal Title: Вісник Національного технічного університету "ХПІ". Серія: Проблеми удосконалювання електричних машин і апаратів. Теорія і практика - Year 2015, Vol 42, Issue 1151
Abstract
In order to improve the energy efficiency of rolling stock and its characteristics are taken Various regulatory tools. In particular, improving circuit design, the transition to pulse traction motor control system, the use of key semiconductor devices with lower internal losses, and so on. Field weakening mode traction engines is one of the main modes of the electric rolling stock. In the previous article, the authors were reviewed in detail to improve the system weakening of the field using DC-DC converter. Grounded all the advantages and disadvantages of this method of regulating the excitation DC machine, but not raised the question of control system, including the algorithm, respectively, which should be easing off. The article rozlyanuto structural and functional scheme of the system weakening control field. The following table of correspondences values and sensors DPHP DPRK and DPRK matching values and αust. Conclusions on the results.
Authors and Affiliations
I. A. Kostenko, A. N. Petrenko
Keywords
Related Articles
- EP ID EP408836
- DOI -
- Views 120
- Downloads 0
The calculation of the motion of charged particles in crossed fields
The results of the calculation of the motion of charged particles in crossed electric and magnetic fields in particle approximation are shown. The parameters of magnetic and electric fields of installation for charged pa...
Modeling the operation of a medium voltage power gridwith a compensated neutral at single-phase ground fault
Introduction. In this article is developed a computational model of medium voltage power grid with three feeder lines in Matlab environment, which allows to simulate the operation of power grid in single phase to ground...
Finite Element analysis of the induction cooker electromagnetic field distribution
Using EleFAnT2D code developed at the Institute for Fundamentals and Theory in Electrical Engineering, Graz University of Technology, Graz, Austria computer modeling of electromagnetic processes in various designs of ind...
Spectral analysis of measured voltage on pick-up coil of eddy current sensor
Spectral analysis of measured voltage on pick-up coil of eddy current sensor in case of noise presence in a signal is made. Main components of noise that influence the measured voltage are found. Here such components are...
Calculation and modification in the magnetic separation system for experiments
The topography and axial distributions of the magnetic field of the device for magneto-separation of charged particle mass "DIS-1" taking into account the magnetic cores and the magnetic field of the plasma source, as we...