The Design and Analysis of Piston - Steady State Thermal Analysis using “Ansys”
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 3
Abstract
In this study thermal analysis on piston made of aluminium alloy are absorbed Internal combustion engines have been a relatively inexpensive and reliable source of power for applications ranging from domestic use to large scale industrial and transportation applications for most of the twentieth century. DI Diesel engines, having the evident benefit of a higher thermal efficiency than all other engines, have served for both light- duty and heavy-duty vehicles. But when the piston moves towards Top Dead Centre (TDC), the bowl geometry has a significant effect on air flow thereby resulting in better atomization, better mixing and better combustion. As the main heating part in the engine, piston works for a long time in high temperature and high load environment. The piston has the characteristics of large heating area and poor heat dissipation, so the thermal load is the most serious problem. In this work, the main emphasis is placed on the study of thermal behaviour of functionally graded materials obtained by means of using a commercial code ANSYS on aluminium alloy piston surfaces. Using CREO software the structural model of a piston will be developed. Furthermore, the steady state thermal analysis is done using Computer Aided Simulation software ANSYS.
Authors and Affiliations
R. Sabarish, M. Prem Jeya Kumar Prem Jeya Kumar
Keywords
Related Articles
- EP ID EP612214
- DOI 10.24247/ijmperdjun201921
- Views 92
- Downloads 0
Microstructural and Corrosion Studies by Immersion in 3.5wt % NaCl Environment on Mg-6Al-1Zn-XCa Alloy with Ca Addition and Aged at different Temperatures
The effect of aging at different temperatures of 180ºC, 200ºC, 220ºC, and 240º C with various level of calcium (X=0.5, 1, 1.5, 2%) addition on Mg-6Al-1Zn-XCa alloy were investigated in 3.5Wt.% NaCl solution. The specimen...
An Analysis of Mode-I Fracture in Carbon-Epoxy Laminate for the Prediction of Critical Loads and Crack Lengths
Present work deals with the analysis of a four layered symmetric angle-ply CFRP laminate for the prediction of critical load for an existing crack and critical crack length at an existing load that causes mode-I fracture...
Experimental Investigation of Stitched and Unstitched Bamboo Fiber Using Sugarcane Powder
To examine the performance analysis of stitching and unstitching of a bamboo fiber laminates and to investigate the de-lamination resistance of laminates. Unstitched, and stitched specimens were prepared with orientation...
The Processing Techniques and Behaviour of Aluminum Metal Matrix with Different Reinforcement Materials
Improvement in the mechanical properties and retainment of properties is an essential requirement for the industrial application. The properties of the composite not only depend on reinforcement materials but it also dep...
IMPLICATIONS OF SUPER LEADERSHIP AND SELF LEADERSHIP FOR PRODUCTION PROCESSES IN INDIAN IT SECTOR
The leadership behavior of leaders and the followers goes a long way in determining the effective functioning of the teams involved in the production processes. Production processes vary industry to industry and so do th...