The dying medium temperature impact on the final moisture content of pine wood at constant drying time
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2016, Vol 95, Issue 1
Abstract
The results of final moisture content of pine wood (Pinus sylvestris L.) after drying process are presented. The wood in the experiments was taken from the northern part of Pomeranian region in Poland. The drying process was performed in the experimental chamber equipped with the micro-jet heat exchanger. The air at temperatures of 40°C, 60°C, 80°C, 100°C and 120°C with relative humidity about 60% and atmospheric pressure was the drying agent. The volumetric flow rate was constant and equal to 7.1 m3 /h, while the average flow velocity of the drying agent was equal to 3.9 m/s. The drying time, equal to 345 minutes, was also constant in each case of study. The obtained results allowed to determine drying rate for each temperature of drying medium. Keywords:
Authors and Affiliations
ALEKSANDRA KONOPKA, JACEK BARAŃSKI
Keywords
Related Articles
- EP ID EP361721
- DOI -
- Views 59
- Downloads 0
Aluminium glazed partitions with timber insulation inserts – fire resistance tests results depending on the type of used wood
This paper discusses the main problems related to the fire resistance of aluminium glazed partitions with timber insulation inserts, including the tests methodology and way of classification of this type of elements. Mor...
Artificial UV light influence on the colour of chemically modified and thermo - mechanically processed oak (Quercus robur L.) and locust wood (Robinia pseudoacacia L.)
Artificial UV light influence on the colour of chemically modified and thermo - mechanically processed oak wood (Quercus robur L.) and locust wood (Robinia pseudoacacia L.). The oak and locust wood was treated with ammon...
Pre-treatment of polyester-based veneers
Pre-treatment of polyester-based veneers. The surface of polyethylene terephthalate (PET) veneers was pre-treated by diffuse surface barrier discharge (DSBD) plasma at atmospheric pressure in various processing gases to...
Impact of structures of selected lounge furniture seats on the comfort of use
Impact of structures of selected lounge furniture seats on the comfort of use. The main objective of the study was to determine the impact of structures of four seats on comfort during short-term use. Fifty-five voluntee...
The production potential of the furniture market in Poland
The paper shows the comparative analyses relating to the production potential of the furniture market and manufacturing in Poland. Furniture industry among others also falls within that category. Therefore selected indic...