The Effect of Chlorhexidine Mouth Rinse on the Colour Stability of Porcelain with Three Different Surface Treatments: An in Vitro Study
Journal Title: Journal of Dental Biomaterials - Year 2014, Vol 1, Issue 1
Abstract
Statement of problem: The effect of mouth washes on discolouration of dental ceramics with different surface preparations is not well documented. Objectives: This in-vitro study has been conducted to evaluate the effect of chlorhexidine (CHX) mouth rinse on colour stability of overglazed (OP), autoglazed, (AP) or polished porcelain (POP) specimens. Materials and Methods: The restorative material investigated in this study was overglazed, autoglazed, or polished feldspathic porcelain. A total of 48 cylandrical specimens were prepared, (n=16 per each group). After baseline colour measurements, for a period of14 days 8 specimens of each group were immersed in 15 ml of 0.2% chlorhexidine mouth rinse twice daily for 2 min. After each immersion, the specimens were washed and stored in artificial saliva. Half of the specimens from each group were selected randomly as controls and stored in artificial saliva that was changed daily. The colour change (ΔE) of the specimens was measured by a spectrophotometer device. Data were statistically analyzed using 2-Way ANOVA followed by Tukey test Results: All the specimens displayed colour changes after immersion in chlorhexidine mouth rinse. POP specimens exhibited more colour change compared to AP and OP specimens (P=0.001). AP and OP specimens showed relatively the same colour change which was not significant compared to the control groups (P=0.9). Conclusion: Auto-glazed and over-glazed porcelain can tolerate chlorhexidine mouth rinse better than polished porcelain. However the colour changes of the ceramic with three different surface preparations were not perceivable clinically.
Authors and Affiliations
AAR Khaledi, A Safari, S Adibi
Keywords
Related Articles
- EP ID EP248941
- DOI -
- Views 62
- Downloads 0
Finite Element Analysis of the Effect of Superstructure Materials and Loading Angle on Stress Distribution around the Implant
Statement of Problem: A general process in implant design is to determine the reason of possible problems and to find the relevant solutions. The success of the implant depends on the control technique of implant biomech...
The Effect of Pre-heating Silorane-based Composite Resin on Marginal Gap Formation of Class V Restorations
Statement of problem: Many efforts have been made to solve the problem of composite resin adaptation and reduce microleakage. Objective: The aim of the present study was to evaluate the effect of preheating of silorane-b...
Effect of Caries Removal Methods on the Shear Bond Strength of Resin and Glass IonomerAdhesives to Primary Dentin
Statement of Problem: There is no enough published data about the shear bond strength of resin modified glass ionomer adhesives on caries-affected primary tooth dentin excavated using minimally invasive systems. Objectiv...
Effect of Smear Layer Removal on Bond Strength of Two Different Resin-Based Sealers; an In Vitro Study
Statement of Problem: During root canal preparation, organic pulpal ma-terials, bacteria and blood cells in combination with inorganic dentinal debris accumulate on the canal wall, producing an amorphous irregular smear...
Comparison of Mechanical Properties Between three Different Types of T-loop
Statement of Problem: T-loop is one of the most popular closing loops in orthodontic profession. However its activation is in the contrary to Bouschinger effect theory, since the formed bends would be opened during activ...