The effect of current signal filtering method on the value of cutting power while sawing wood
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2015, Vol 91, Issue
Abstract
The effect of current signal filtering method on the value of cutting power while sawing wood. The goal of this work was to investigate an effect of various signal pre-processings on the outline of the electrical power curve and its influence on the measured cutting force estimation. Two signal processing methods were selected for the needs of the experiment, including digital filter and wavelet transform. The filter used was Butterworth, 3rd order band-stop with the cut-out band from 45 Hz to 55 Hz. The second approach performed was the wavelet decomposition. The carried out results analyses revealed that the properly selected digital processing method of the measured current signal affected by the electrical noise of the constant frequency of 50 Hz does not decrease of information which is carried along by the root signal. The best results were obtained if the root signal has been processed with Discrete Wavelet Transform.
Authors and Affiliations
Kazimierz Orłowski, Jakub Sandak, Tomasz Ochrymiuk, MARCIN LACKOWSKI, Anna Sandak
Keywords
Related Articles
- EP ID EP359946
- DOI -
- Views 76
- Downloads 0
The assumptions an algorithm for image analysis for the assay fronds growth of common duckweed (Lemna minor L.)
The assumptions an algorithm for image analysis for the assay fronds growth of common duckweed (Lemna minor L.). The assumptions of the algorithm aiming to automate and eliminate human error during the process of determi...
Poplar wood (Populus tremula L.) findings of finger - jointed timber
Poplar wood (Populus tremula L.) findings of finger-jointed timber. Poplar wood can be classified into strength classes C14- C40 from the construction timber quality point of view. Due to the lack of a spruce constructio...
Качество поверхности древесностружечных плит в зависимости от температуры их прессования
Surface quality of particleboards depending on the temperature of their pressing. An increase of tem-perature of pressing of particleboards in the range from 180 to 240 оС leads to decreasing in density of the edge zones...
Propolis and organosilanes in wood protection. Part I: FTIR analysis and biological tests
Propolis and organosilanes in wood protection. Part I: FTIR analysis and biological tests. The paper presents the preliminary results of chemical and biological analyses of wood treated with a formulation based on ethano...
Energy consumption during teac wood thermal treatment
Energy consumption during teac wood thermal treatment. This paper focuses on energy consumption during teac wood thermal treatment in compliance with the ThermoWood process. The energy consumption during the process of t...