THE EFFECT OF ELECTRON BEAM IRRADIATION ON TRIBOLOGICAL CHARACTERISTICS OF PTFE, POM, AND PA IN COMBINATION WITH AN ANODIC-OXIDE COATINGS
Journal Title: Tribologia - Year 2012, Vol 243, Issue 3
Abstract
In this paper, the authors present the results of tribological and stereometric tests as well as the results of surface morphology of polytetrafluoroethylene, polyoxymethylene, and polyamide subjected to modification with a beam of high energy electrons in collaboration with an aluminium anodic-oxide coating (AOC). The aim of this study was to determine the suitability of the selected modified polymer to work with an anodic oxide coating in non-lubricated friction nodes. The paper is a continuation of an issue related to AOC cooperation with selected polymer, iron alloys, and ceramic materials. The results showed that the selected materials behave differently during tribological cooperation with an oxide coating. A modification with the use of an electron beam deteriorated the tribological properties of these materials, mainly their wear intensity.
Authors and Affiliations
Piotr Duda, Marek Bara, Sławomir Kaptacz
Keywords
Related Articles
- EP ID EP270519
- DOI -
- Views 28
- Downloads 0
THE WEAR PERFORMANCE OF DIAMOND-LIKE CARBON COATINGS IN RELATION TO COATING COMPOSITION AND FRICTION PAIR
This study has been carried out to examine diamond like carbon coatings; a-C:H:W single-layer and TiN/a-C:H:W multilayer prepared on CoCrMo alloy by the PVD and PACVD technique. Information on the composition of amorphou...
DISSIPATION AND ACCUMULATION OF ENERGY AS FACTORS CONDITIONING STABILITY OF FRICTIONAL COUPLES
Wear and stability of frictional couples are presented as a function of dissipation and accumulation of energy. Such couples are treated as open thermodynamic systems and processes occurring in them are described on the...
Optymalizacja zawartości dodatków smarnych w modelowych kompozycjach smarowych
FINITE ELEMENT ANALYSIS OF THE THERMAL BEHAVIOUR OF SINGLE-DISC CLUTCHES DURING REPEATED ENGAGEMENTS
Most of the failures in the sliding systems occur due to the high thermal stresses, which generated at the interface between the contacting surfaces due to sliding between parts, such as friction clutches and brakes. In...
WEAR OF Si OR B DOPED AMORPHOUS CARBON COATINGS
The paper describes a complex wear research on DLC (amorphous carbon) doped with boron (B) and silicone (Si). The tests were carried out in two different sliding systems: flat–on–flat (ring contact, unidirectional slidin...