The effect of external magnetic flux field in the QTS weldment on the change of fatigue crack propagation behaviors
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 2, Issue 12
Abstract
<p class="a">This investigation discusses fatigue crack propagation behaviors on the welded joint of Hot Rolled Quench Tempered Steel (QTS) in which during welding process the fusion zone of the joint was subjected to magnetic flux field. The QTS weldability is not really excellent due to the change of microstructure into tempered martensite, and the possibility of microcrack defect on the welding area is still high. The purpose of the investigation is to know the effect of External Magnetic Flux (EMF) field during welding process on fatigue crack propagation behaviors. The external magnetic flux is applied transversely from two sides of the workpiece using a DC powered solenoid of 0, 3, 6, 9 and 15 Amperes. The effect of EMF is more sensitive to decrease the tensile strength and the fatigue crack propagation rate of the weld area. The result shows that the electromagnetic force on the weld pool increases. It causes the liquid metal circulation rate to increase and welding defects to decrease. This indicates that the liquid metal and filler metal are easily mixed, the release of gas from liquid metal to surface before solidification easily happens. The finding shows that the effect of EMF is more efficient.</p>
Authors and Affiliations
Sugiarto Sugiarto, Rudy Soenoko, Anindito Purnowidodo, Yudy Surya Irawan
Keywords
Related Articles
- EP ID EP527940
- DOI 10.15587/1729-4061.2018.122919
- Views 65
- Downloads 0
Development of a method of increasing the interference immunity of frequency-hopping spread spectrum radio communication devices
The development of a technique for increasing the interference immunity of frequency-hopping spread spectrum radio communication equipment has been carried out. The essence of the proposed method is the rational distribu...
Improving the energy efficiency of solar systems for obtaining water from atmospheric air
<p>We considered problems of water scarcity elimination in arid regions of the planet and analyzed modern water producing systems. We showed the prospects of obtaining of water from atmospheric air directly while cooling...
Analysis of the interaction between properties and microstructure of construction ceramics
<p>We have defined the basic properties of ceramic bricks for various purposes. The microstructure and phase composition of ordinary, facing and clinker bricks were investigated. We have established the interrelation bet...
Development of a procedure for determining the basic parameter of aquatic ecosystems functioning ‒ environmental capacity
<p>Environmental capacity as the main parameter of functioning of aquatic ecosystems was studied. This parameter is an effective indicator of violation of structural and functional processes in the technogenically altere...
Utilization of the prepyrolyzed technical hydrolysis lignin as a fuel for iron ore sintering
<p>A promising direction of technical hydrolysis lignin utilization is metallurgical production, primarily iron ore preparation and blast furnace process. A significant potential is concentrated in the sintering process....