The Effect of Landslide on Gas Pipeline
Journal Title: Strojnicky casopis - Journal of Mechanical Engineering - Year 2016, Vol 66, Issue 2
Abstract
The present paper deals with the calculation of stresses on the pipeline system embedded on a flexible substrate which is burdened by a landslide. As well as taking into account the probability of the influences acting on the pipe as wall thickness, and others.
Authors and Affiliations
Vojtech Valkovič, Roland Jančo and Karel Frydrýšek
Keywords
Related Articles
- EP ID EP43895
- DOI https://doi.org/10.1515/scjme-2016-0023
- Views 205
- Downloads 0
Frequency Response Function Measurement on Simplified Disc Brake Model
The paper describes role of non-proportional damping in flutter type instability, demonstrated on simplified disc brake model. The discrete two degrees of freedom system is considered to imply damping induced instabili...
Experimental Evaluation of Mechanical Properties of Friction Welded Dissimilar Steels under Varying Axial Pressures
The present study emphasizes on joints two industrially important materials AISI 304 with AISI 1021steels, produced by friction welding have been investigated. Samples were welded under different axial pressures rangin...
Optimization of Sluice Gate under Fatigue Life Subjected for Forced Vibration by Fluid Flow
A ‘Sluice’ is a water-flow control gate works with sliding. So, it’s a mill race, flume or a penstock, channelling water towards a water mill, traditionally a wood or metal barrier sliding in grooves that are set in the...
Mechanical Characteristics and Wear Resistance of the Cladding Layers Obtained by Melting of Cored Wires with Simultaneous Vibration of Substrate
A wear proof layer was obtained by applying vibration with a frequency of 100 Hz and amplitude of 0; 70; 300 µm to the cored wire of Fe-Cr-B-C doping system during welding. It was shown that horizontal vibration affect...
Investigation of Defect Effects on Adhesively Bonded Joint Strength Using Cohesive Zone Modeling
In this paper, effects of the defect in an adhesively bonded joint have been investigated using cohesive zone modeling. Consequently, a 3D finite element model of a single lap-joint is constructed and validated with ex...