THE EFFECT OF MAGNETIC PARTICLE CONCENTRATION ON THE FERROFLUID LUBRICITY
Journal Title: Tribologia - Year 2012, Vol 244, Issue 4
Abstract
The subject of the author’s research, whose results are presented in this article, are the chosen properties of ferrofluid. The author assumes that the concentration of magnetic particles in ferrofluid may significantly affect the basic properties of the ferrofluid like: density, dynamic viscosity, or lubricity, as well as flow and operating parameters of journal bearings lubricated with ferrofluids. The purpose of this paper is to present the impact of the concentration of magnetic particles in the ferrofluid on its lubricity. Experimental investigations were performed on the four-ball T-02U tester, and the tested ferrofluid was a mixture of colloidal mineral motor oil SAE 15W-40 with Fe3O4 magnetic particles and the surfactant. This work is part of a wider study on the analysis of changes in operating parameters of journal bearings lubricated with ferrofluids.
Authors and Affiliations
Marcin Frycz
DETERMINATION OF MECHANISMS OF WEAR FOR ROLLING- -SLIDING CONTACT IN SELECTED OPERATIONAL CONDITIONS BY MEANS OF SURFACE TOPOGRAPHY AND MES STUDIES
The paper presents the influence of selected operating factors, i.e. load, slip, and wear rate, and surface conditions. The wear mechanism between the cooperating rolling surfaces in the rolling/sliding combination varie...
WYKORZYSTANIE SPRĘŻYN TALERZOWYCH DO UZYSKANIA NAPIĘCIA WSTĘPNEGO ZESPOŁU ŁOŻYSK STOŻKOWYCH WAŁU PRZEKŁADNI TURBINY WIATROWEJ
Układ napędowy turbiny wiatrowej przy wykorzystaniu łożysk stożkowych napiętych wstępnie pozwala na przeniesienie napędu z wysokim stosunkiem siły obwodowej do siły promieniowej. Badany układ łożysk składa się z pary dwó...
TRIBOLOGICAL STUDIES OF POM COMPOSITES WITH THE ADDITION OF ARAMID FIBER AND WITH POWDER PTFE COOPERATING WITH STEEL
The article presents the results of comparative tribological studies of composites based on polyoxymethylene (POM), with the trade name Tarnoform, with cut aramid fibres and PTFE powder. These fillers have occurred in th...
Study on thermo-mechanical instability in the industrial brakes
Cryogenic treatment and PVD coatings to augment wear resistance of tool steels