The Effect Of The Pre-Heating Process On Surface Roughness Of Compomer
Journal Title: Uluslararası Dis Hekimligi Bilimleri Dergisi - Year 2023, Vol 9, Issue 3
Abstract
Aim: In pediatric dentistry, where fast finishing processes are of great importance to reduce the roughness in order to obtain an ideal restoration surface. In restorative materials, differences in surface roughness may occur with the pre-heating process. Therefore, the aim of the study is to compare the surface roughness of the compomer prepared at four different temperatures. Materials and Methods: In this study, discs prepared from light-cured compomer prepared at four different temperatures were evaluated and their surface roughnesses were compared. Compomer, which was brought to pre-heat values using a composite heating device to bring it to 39 ºC and 55 ºC, was placed on silicone discs with a diameter of 10 mm and a thickness of 2 mm. The surface roughness was measured with a profilometer device. Statistical analysis was performed with One Way ANOVA and t-test. Results: The surface roughness value of the compomer was the highest at 4 °C and the lowest at 55 °C. A statistically significant difference was found between the roughness value of compomer at 4 °C and the roughness values at 23 °C and 55 °C (p<0.05). The roughness values at 39 °C and 55 °C showed a statistically significant difference (p<0.05). Conclusion: Differences can be observed in the surface roughness of the compomer with the pre-heating process. In order to obtain smooth surfaces, it is recommended to apply compomers in clinical usage by bringing them to the appropriate temperature.
Authors and Affiliations
Ebru HAZAR BODRUMLU Gözde ARSLAN
Keywords
Related Articles
- EP ID EP725757
- DOI DOI: 10.21306/dishekimligi.1323552
- Views 23
- Downloads 1
Resin Matrix CAD/CAM Materials
CAD/CAM stands for computer-aided design and computer-aided manufacturing. CAD/CAM systems are used to speed up the design and production process in dentistry. With three-dimensional design and milling, various restorati...
FABRICATION OF TOTAL PROSTHESIS USING NEUTRAL ZONE CONCEPT: A CASE REPORT
In patients with severe residual ridge resorption and where implant treatment is not possible, traditional complete prosthesis construction becomes difficult. The neutral zone concept can be applied to increase the stabi...
COMPARISON OF CONE BEAM COMPUTED TOMOGRAPHY, PANORAMIC RADIOGRAPHY AND ULTRASONOGRAPHY FOR THE DETECTION OF SOFT TISSUE CALCIFICATION
Aim: The aim of the study is to determine the distribution of soft tissue calcifications according to age, gender and localization and to compare 3 different imaging techniques in the detection of these heterotopic struc...
Stafne Kemik Kavitesinin Panoramik Radyografi İle Değerlendirilmesi: Retrospektif Bir Çalışma
Amaç: Stafne kemik kavitesi (SKK) terimi, çoğunlukla mandibular kemiği etkileyen lokalize bir kemik defektini tanımlar. Bu çalışmanın amacı, kliniğimize başvuran hastalarda SKK prevelansını belirlemek, SKK’nin panoramik...
Quantitative Comparıison of The Preparation Efficiencies of Two Different Rotary File Systems in Permanent Mandibular Molars
İrem Eren Berkant Sezer