THE EFFECT OT SELECTED FACTORS ON THE PROCESS OF WEAR UNDER OSCILLATORY MOTION
Journal Title: Tribologia - Year 2018, Vol 279, Issue 3
Abstract
On the surface of the components cooperating under the sliding motion, complex tribological wear processes take place. It leads to the volume loss of components of the friction pair direct metal to metal contact. The amount of this volume depends on the input factors that determine the operation of the friction couple. Therefore, the aim on the presented work was to evaluate the influence of the selected factors on the volume loss on the block and ring under the oscillatory motion. Wear tests were carried out in a non-conformal contact with the use of the T-05 tribotester with the assumed number of operated cycles. As the part of the tests, measurements of the volume loss of the test elements were made. The geometrical structure of the surface of the block and counter block was formed on the basis selected technological process. The relationship between volume and the following factors was obtained: load, frequency of oscillation, and amplitude of oscillation.<br/><br/>
Authors and Affiliations
Grzegorz KACZOR
Keywords
Related Articles
- EP ID EP403186
- DOI 10.5604/01.3001.0012.7011
- Views 45
- Downloads 0
DETERMINING THE COEFFICIENTS OF THE PSEUDO-VISCOSITY OF ENGINE OILS
During the operation of the internal combustion engines, lubricating oils wear out. The following has a significant impact on that process wear of engine parts and contact of wearing elements with working oil, the destru...
Alkilopoliglukozydy, jako aktywne powierzchniowo związki, obniżające opory ruchu i zużycie w różnych skojarzeniach materaiałowych
Jako dodatki poprawiające właściwości smarne wody zaproponowano alkilopoliglukozydy (APG). Wykorzystano dwa rodzaje alkilopoliglukozydów różniące się długością łańcucha alkilowego i stopniem polimeryzacji. Badania tribol...
THE TRIBOLOGICAL PROPERTIES OF DLC COATINGS
The paper presents the results of a-C:H and a-C:H:W diamond-like carbon coatings deposited using the PACVD process. The topography, texture, and cross section analysis of the coatings were determined by applying profilom...
ASSESSMENT OF TRIBOLOGICAL PROPERTIES OF GEAR OILS
The results of the tribological test of fresh and used gear oils and model-polluted oils (containing water and solid substance) are presented in this paper. The scuffing load was determined in an updated Four-Ball machin...
HIGH RESOLUTION MICROSCOPY AS TOOLS FOR SLIDING MICROBEARING RADIAL CLEARANCE AND GROOVES GEOMETRY MEASUREMENTS