The Engineering Calculation of Flexible Shells of Timber-Rafting Anchors
Journal Title: Lesnoy Zhurnal (Russian Forestry Journal) - Year 2024, Vol 5, Issue 5
Abstract
Currently, the issue of delivering wood raw materials from remote forest areas, where the largest volumes are located, is relevant. Often, this delivery is economically justified only when using a network of medium and small rivers with the use of environmentally friendly technologies. On such rivers, it is preferable to use mobile anchors, in particular shore fillable ones, for fixing timber-rafting objects. A description has been given of a new modification of such an anchor, which differs from the prototype by a container having a flexible shell. This allows to significantly reduce the material consumption for manufacturing the container, the dimensions of the anchor in the transport position, and to produce anchors of any realistic size. The choice of the most rational option for such a container implies the scientific justification of its parameters. The aim of the study is to develop a scientific basis for this justification. Analytical formulas have been theoretically obtained for determining the basic geometric characteristics of the cross-section of the container under consideration. These formulas are useful in scientific research, but their application is very problematic in practical engineering calculations. This is due to the dependence of the specified characteristics on elliptic integrals and parameters, which are very difficult to measure in engineering practice. Having performed calculations using these formulas for a single cross-sectional area, we have obtained its specific geometric characteristics for various shapes, i.e. for various width-to-height ratios of a container to be filled. The results of the calculations have been approximating dependencies linking the named characteristics with the specified ratio, which is called the shape factor. Multiplying the specific characteristics by the square root of the cross-sectional area gives the absolute values of the corresponding characteristics. As a result, we have obtained formulas convenient for practical use, allowing to determine the width and height of the container to be filled, the width of its base, the perimeter of the cross-section, the heights of the zero pressure line and the extreme lateral point of the cross-section above the base of the container. The accuracy of calculations based on these and analytical formulas is almost the same. A formula for determining the specific tension of a flexible container shell has been obtained. The nature and degree of influence of the shape factor and length of the container on its other geometric characteristics have been established. An algorithm for substantiating the key parameters of a container to be filled with a flexible shell has been developed using the described results.
Authors and Affiliations
Sergey V. Posypanov, Konstantin V. Kozlov
Keywords
Related Articles
- EP ID EP750051
- DOI 10.37482/0536-1036-2024-5-159-174
- Views 29
- Downloads 0
Modeling the Thermal Regime of Road Pavement and Roadbed of Logging Roads
Soil freezing is observed throughout almost the entire forested area of the Russian Federarion in winter. The effect of negative temperatures on dusty-clay soils causes a number of adverse processes that change the prope...
Processing Factors and Properties of Thermal Insulation Boards Made of Plant Fillers
Wood processing soft waste is mainly used in the production of fuel briquettes, irrecoverable (non-recyclable) waste from spinning flax and cotton are incinerated or sent to dump. The development of methods for recycling...
Fuel Consumption of a Straddle Forestry Tractor in Consideration of Stochastic Factors
Currently, there is a tendency for creation a cross-functional tractor line of drawbar category. Everything is very practical and consistent from the perspective of the producer of such tractors. The number of modular un...
The Effect of Long-Term Periodic Fertilization on the Structure of the Stand and the Ground Cover in the Cowberry Pine Forests of Middle Taiga (Republic of Karelia)
The results of research on studying the influence of after-effects of periodic nitrogen (N) and complex fertilizer (NPK) treatments on the structure of the tree layer and ground cover are reported. The study objects were...
Aboveground Stand Phytomass in Experimental Cultures of Lodgepole Pine in Syktyvkar Forestry of the Komi Republic
The purpose of this work is to evaluate and comparatively analyze the above ground phytomass of lodgepole pine (Pinus contorta Dougl.) and Scots pine (Pinus sylvestris L.) in experimental cultures. The results of studies...