The heterostructure ZnO/Al/SiO2/Si fabrication for Piezoelectric SAW and BAW Transducers and Sensors

Journal Title: Journal of New technology and Materials - Year 2017, Vol 7, Issue 1

Abstract

Zinc oxide (ZnO) thin films were deposited by pulsed laser deposition technique for making ZnO/Al/SiO2/Si Bulk and Surface Acoustic Wave (BAW and SAW) transducers. The aim is to improve the piezoelectric properties of the ZnO films, which are strongly linked to their texture and microstructure. ZnO films with a wurtzite structure were deposited on the Al electrode layer, at different substrate temperatures, within the 100-500°C range. The characterization by X-ray diffraction showed that the deposited Al electrode was (111) oriented and that the ZnO film has a c-axis (002) preferential orientation. The scanning electron microscopy of the ZnO films on Al/SiO2/Si substrate showed an evidence of compact grains with a honeycomb-like structure on surface and a columnar structure on cross-section appeared after a sequential transition of amorphous to non-oriented to crystalline phase. The results indicated that the optimum substrate temperature is of 300°C and the electrical input impedance measurement on the Al/ZnO/Al BAW structure showed a piezoelectric response, where the fundamental resonance mode was located at 160 MHz, with an electromechanical coupling coefficient Keff2 equal to 3.2%. The best piezoelectric response is obtained at the fourth (4th) thickness mode vibration, located at the frequency of 636.3 MHz and having Keff2 of 9.10%.

Authors and Affiliations

R. Serhane, F. Hadj-Larbi, S. Lafane, T. Boutkedjirt

Keywords

Related Articles

Claviceps purpurea fungus: apromising biosorbent for wastewater treatment

In this study, Claviceps purpurea was successfully used, for the first time, to remove methylene blue dye from aqueous solutions and treat wastewater. This fungus was as efficient as commercially activated carbon in term...

Modeling and prediction investigation of the resistivity of the perovskiteLa0.57Y0.10Ba0.23Ca0.10MnO3 compound

Based on the mathematical model, the electrical resistivity of La0.67-x Yx Ba0.23 Ca0.1 MnO3 composites was investigated. The model reproduces the essential characteristics of the experimental results and also gives a de...

Optimization of a GaAsN ternary alloy based solar cell for high efficiency

We report on the photovoltaic characteristics of solar cells based on GaAs1-xNx grown on gallium arsenide. The GaAsN is a recently developed novel solar cell material for its promising tunable band gap of 1.42 eV to 3.4...

The effect of sliding speed and normal load on the friction and wear behavior of TiO2 thin films

The tribological behavior of TiO2 thin films was investigated against test parameters. The friction coefficient under different normal loads, sliding speeds, and numbers of cycles was studied using a micro-scratch tester...

Experimental study of solar drying of Tunisian phosphate: in open sun, under greenhouse and by a parabolic concentrator

This work is part of operating a parabolic concentrator for drying the phosphate. This study is to analyzing the drying of Tunisian phosphate by three separate solar processes. Two experimental devices have been implemen...

Download PDF file
  • EP ID EP260111
  • DOI -
  • Views 91
  • Downloads 0

How To Cite

R. Serhane, F. Hadj-Larbi, S. Lafane, T. Boutkedjirt (2017). The heterostructure ZnO/Al/SiO2/Si fabrication for Piezoelectric SAW and BAW Transducers and Sensors. Journal of New technology and Materials, 7(1), 47-52. https://europub.co.uk/articles/-A-260111